Wadia Digital CD Player S7I User Manual

Information & Operation Manual  
 
Information & Operation Manual  
Table of Contents  
Preliminaries  
Wadia Digital – A Brief History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3  
Installation and Set-up  
Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Installing the Tip-Toes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Connecting to Your System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Connecting to AC Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Connecting Directly to a Power Amplifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Using with a Preamplifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Optimizing the Output Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Connecting Digital Sources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Choosing a Digital Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Frequently Asked Questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
General Operation  
Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Display Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Display Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Disc Formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10  
Remote Control Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11  
Playback Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13  
Theory of Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14  
Menu Screen Map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16  
Digital Algorithms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17  
Appendices  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18  
Using Data Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18  
Software License Agreement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18  
Environmental Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18  
Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19  
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
2
 
Thank You  
All of us at Wadia would like to offer thanks and congratulations to you for purchasing the Wadia S7i Integrated  
CD Player / Decoding Computer. We sincerely believe that your Wadia S7i Integrated CD Player / Decoding  
Computer will bring you many years of musical pleasure and satisfaction.  
While every new owner is anxious to begin listening, we encourage you to take a few minutes to read this manual  
and familiarize yourself with the full capabilities of the Wadia S7i Integrated CD Player / Decoding Computer.  
If you are in a hurry to begin listening, please read the sections of this manual where the symbol at  
right is shown.  
!
Wadia Digital – A Brief History  
Wadia Digital, founded in 1988, is one of the original companies dedicated to high performance digital audio  
reproduction. Wadia was formed by a team of engineers from the Minneapolis based 3M Corporation (Minnesota  
Mining and Manufacturing) who shared many years of experience in advanced digital telecommunications  
research and development. In the early 1980’s, these engineers became intrigued by the emerging compact disc  
technology. Disappointed with the sound quality of early CD players, they examined the workings and designs of  
these early components and found them to be unsophisticated when compared with the technology available in  
other areas of digital design. In response, they founded Wadia Digital – a company based on the philosophy of  
applying advanced technology to improve the performance of digital audio components. Wadia’s first product, the  
Wadia 2000 Decoding Computer, was an absolute breakthrough in digital audio. For many discerning listeners, it  
proved that Digital Audio was a musically responsive, evolving, and engaging format.  
Building on a tradition of excellence, Wadia continues to develop innovative technology; refining, listening,  
engineering, and improving along the way. Since the Wadia 2000, new generations of industry-leading designs  
have been introduced and embraced by listeners around the world. Each step of the way, Wadia has consistently  
raised the standard for performance of Digital Audio playback.  
Here is a brief list of the technological innovations the Wadia engineers have pioneered over the past 20 years:  
• DigiMaster™ patented algorithm (filter optimized for reproducing music)  
• ClockLink™ proprietary jitter reduction technology  
• SwiftCurrent™ current to voltage conversion technology  
• First outboard Digital-to-Analog converter  
• First to apply glass fiber-optics to home audio  
• First to recognize jitter as a source of audible distortion  
• First to perfect digital volume control  
• First high-end CD player competitive with expensive separates  
• First company to provide bit perfect digital audio output from the iPod  
Although Wadia’s digital expertise and track record exceed those of any audio company, technology alone does  
not guarantee musical performance. Wadia designs are born of a delicate balance of technology shaped by a  
passion for music.  
Wadia is proud to introduce the Wadia S7i Integrated CD Player / Decoding Computer, a breakthrough in sonic  
performance and value, and a strong statement of our years of dedication to music.  
3
 
S7i Integrated CD Player / Decoding Computer  
Installation and Set-up  
Unpacking  
Use care in unpacking your Wadia S7i Integrated CD Player / Decoding Computer. Inspect it for any shipping  
damage and call your dealer immediately if any is found.  
Do not plug your Wadia S7i CD Player / Decoding Computer into an AC outlet if you find shipping damage.  
!
!
We advise saving all packing materials so that the unit can be easily and safely shipped if the need arises.  
Accessories  
Provided with the Wadia S7i Integrated CD Player / Decoding Computer are the following accessories:  
• AC power cord  
• Four tip-toes with threaded studs  
• Four steel coasters  
• RCA/BNC adapter  
• Remote Control  
Do not tip the unit onto the back panel. This can damage input and/or output connectors.  
Installing the Tip-Toes  
With the unit still positioned on its side, screw one of the tip-toes into the bottom of each corner post.  
Position the Wadia S7i Integrated CD Player / Decoding Computer where you would like it to reside in your  
system. We recommend choosing a solid, non-resonant, level surface for best performance. If this surface is  
susceptible to damage, place one of the steel coasters under each tip-toe.  
4
 
Connecting to Your System  
CHECK  
VOLTAGE  
HERE  
!
Check to make sure your Wadia S7i CD Player/Decoding Computer has been manufactured for operation  
at your AC line Voltage. Attempting to use the Player at any voltage other than the specified on the  
rear of the unit may damage the unit. Damage caused by improper operation is not covered by warranty.  
If the voltage specified is different from your AC voltage, contact your Wadia dealer.  
!
Connecting to AC Power  
We have designed your product with careful attention to every detail. We are extremely confident of the  
performance obtained when your Wadia component is plugged directly into the wall with the power cord provided.  
Your Wadia product has been designed with power conditioning, surge suppression and an extremely sophisticated  
overall protection scheme. Externally sourced surge protectors, power conditioners, or aftermarket power cords  
can be a mixed bag of benefits and limitations, particularly those which limit current and/or alter phase relationships  
of the voltage and current (power factor) delivered to the Wadia product. In some cases, we have found aftermarket  
products can be quite beneficial, while in other cases we have found that these products can actually degrade the  
sonic performance. If you wish to experiment with any of these devices, work closely with your local dealer –  
and most of all, trust your own ears.  
Connecting Directly to a Power Amplifier  
Avoid allowing static shocks to be applied to the inputs or outputs. To prevent static shocks, touch any grounded  
surface, such as the Wadia S7i Integrated CD Player/Decoding Computer chassis, before connecting or removing  
a cable. It is unlikely that a static shock will damage the unit, but it may cause the Wadia S7i Integrated CD  
Player / Decoding Computer circuitry to “lock-up” (see Trouble Shooting: Lock-Up in the Appendices).  
Inputs and outputs can be safely connected to the Wadia S7i Integrated CD Player / Decoding Computer  
1. Before the unit is powered up  
2. When the unit is in Relay-Mute mode  
We strongly recommend that you use your Wadia S7i Integrated CD Player / Decoding Computer connected  
directly to your power amplifier. Even if you purchased your Wadia S7i Integrated CD Player/Decoding Computer  
with the intention of connecting it to your preamplifier, we suggest that you try direct connection to your amplifier.  
Many listeners are surprised by the improvement in performance over even the most expensive preamplifiers.  
To connect your Wadia S7i Integrated CD Player / Decoding Computer to a power amplifier, ensure that your  
power amplifier is turned off then connect your analog interconnects from the Wadia S7i Integrated CD Player /  
Decoding Computer analog outputs to the amplifier’s inputs.  
Using with a Preamplifier  
While the Wadia S7i Integrated CD Player / Decoding Computer was designed to be used without a preamplifier,  
no compromises were made in its design that will prevent excellent operation in a conventional system with  
a preamplifier. When using a preamplifier, set the volume control to its maximum level.  
5
 
S7i Integrated CD Player / Decoding Computer  
Optimizing the Output Level  
Best performance is obtained when operating the Wadia Volume Control near the top of its range. If needed,  
the maximum output level of your Wadia S7i Integrated CD Player / Decoding Computer can be adjusted to  
match the overall sensitivity of your system so that the critical listening will take place with the volume control  
operating near the top of its range.  
The maximum output level of the Wadia S7i Integrated CD Player / Decoding Computer is adjustable by  
means of a set of internal switches. The Wadia S7i Integrated CD Player / Decoding Computer is factory set to  
accommodate the most common range of system sensitivity. If you find that your typical volume level during  
critical listening is below 65 on the volume display, it will be advantageous to use a different setting. To change  
the output level, consult your dealer.  
Connecting to Other Digital Sources  
The Wadia Integrated CD Player /Decoding Computer is equipped with digital inputs which can accept digital  
signals from any of these established digital formats. (Input 1: Wadia USB, Input 2: Coaxial with BNC connector,  
Input 3: Plastic-optical TOSLINK, Input 4: AES/EBU with XLR connector).  
The Wadia Integrated CD Player /Decoding Computer digital inputs will decode any word length up to 24-bit,  
and any of the standard digital audio sampling frequencies up to 96kHz.  
Choosing a Digital Cable  
The performance of any digital transmission method depends on the quality of the cable and the sophistication of  
the transmitter and receiver. For example, a high quality coaxial cable can outperform a low quality AES/EBUcable.  
A high quality AES/EBU cable will outperform a poorly implemented glass optical system. If you are using a  
coaxial cable we recommend that you have the cable terminated with a BNC connector. This will provide higher  
performance than an RCA connector. Your Wadia Integrated CD Player /Decoding Computer comes with an  
RCA/BNC adapter that can be used for experimentation between different types of coaxial cable. Please note  
that USB cables from different manufacturers can exhibit a broad range of performance levels. Regardless of  
manufacturer, the length of USB cable can affect sound quality in significant ways, with shorter lengths always  
sounding better than extremely long lengths.  
Again, we highly recommend that you take advantage of your dealer’s experience and, most importantly, trust your ears.  
All XLR-type inputs and outputs on the Wadia S7i Integrated CD Player / Decoding Computer, both digital and  
analog, use the standard audio pin configuration:  
Pin 1 - Ground  
Pin 2 - Positive signal  
Pin 3 - Negative signal  
6
 
Frequently Asked Questions  
Should I use a Balanced or Unbalanced connection?  
If your amplifier has a true balanced input, we recommend you use the balanced analog output from your Wadia  
S7i Integrated CD Player/Decoding Computer. All things being equal, properly implemented balanced (also called  
differential) circuitry sounds better than unbalanced circuitry. The Wadia S7i Integrated CD Player/Decoding Computer  
is a true balanced design. It generates the inverted signal in the digital domain and all subsequent processing is  
done in balanced mode. Your Wadia S7i Integrated CD Player/Decoding Computer is designed to maintain many  
of the advantages of true balanced design when using the unbalanced outputs. In addition, the Wadia S7i Integrated  
CD Player / Decoding Computer output stage is capable of driving both types of outputs simultaneously.  
Why should I bypass the Preamplifier?  
A preamplifier is unnecessary when using your Wadia S7i Integrated CD Player / Decoding Computer. The Wadia  
S7i Integrated CD Player / Decoding Computer provides all the necessary control functions of a preamp while  
the signal is still in the digital domain. This avoids the sonic degradation caused by analog circuitry, switches,  
and wire. The Wadia S7i Integrated CD Player / Decoding Computer output stage can drive any power amplifier  
and any interconnects, even at very long lengths.  
Does the Wadia Volume Control compromise resolution?  
The Wadia S7i Integrated CD Player/Decoding Computer uses the latest generation of Wadia’s proprietary digital  
volume control. The volume level can be varied in the digital domain by means of mathematical manipulation of  
the signal, eliminating the distortion and noise that are inevitable with even the best analog volume controls. While  
conventional thinking indicates that reducing the volume digitally can sacrifice low level resolution, Wadia has  
created an innovative solution. Wadia’s patented digital filtering algorithm produces a 24 bit output rather than the  
16 bits stored on the CD. This high-resolution signal is then used in the computations which in turn reduce the volume  
level. This new signal is fed directly to the DAC chips. Through this innovative method, the Wadia S7i Integrated  
CD Player / Decoding Computer maintains high resolution even at the lowest volume control settings.  
Can I bypass the Wadia Volume Control?  
Because the Digital Volume control does not include any analog circuitry, there is none to be bypassed. Even the  
mathematical program step that performs the Digital Volume Control calculation is an integral part of the Wadia  
DigiMaster filter algorithm and therefore cannot be bypassed. If you do not need the Wadia Volume Control, set  
it to its maximum level of 100 on the display.  
What about Analog Sources?  
In order to fully realize the potential of this type of system, Wadia has a range of Analog-to-Digital converters.  
Now it is possible to use analog sources, such as a tuner, tape deck, or even a turntable (in conjunction with a  
suitable phono stage) in your system without using a conventional analog preamplifier. Consult your dealer for  
more information on the Wadia Analog-to-Digital products.  
Should I leave the Wadia S7i Integrated CD Player / Decoding Computer with the power on?  
The Wadia S7i Integrated CD Player / Decoding Computer is designed to be left with the power on with no harm  
or wear to the unit. All motors and laser circuitry turn off when the unit stops playing. If desired, the front dis-  
play can be turned off (see Turning off the Display under Remote Operation). Leaving the power on allows  
the circuitry to remain in thermally stable, which provides better performance and longer life. Careful listeners  
will notice that the sound of the Wadia S7i Integrated CD Player / Decoding Computer will improve steadily after  
the unit is powered up. A new unit will undergo more dramatic changes when power is applied for the first time.  
If you turn off your Wadia S7i Integrated CD Player / Decoding Computer for more than an hour, you will find  
that the unit will undergo similar, but less dramatic improvement once power is reapplied.  
7
 
S7i Integrated CD Player / Decoding Computer  
General Operation  
Using the switch located directly above the AC power input, turn the switch to the ON position.  
Front Panel Controls  
The front panel of the Wadia S7i Integrated CD Player / Decoding Computer features basic controls that allow  
you to operate basic functions without using the Remote Control.  
Volume Up  
Increase the volume by 1/2 dB.  
Play/Next Track  
This button will cause the unit  
to advance to the next track  
and begin playing.  
Previous Track  
This button will cause the unit  
to move to the previous track  
and begin playing.  
Open/Close/Stop  
If the drawer is open, pushing this  
button will CLOSE the drawer.  
Volume Down  
Decreases the volume by 1/2 dB.  
If the CD is playing, pushing this  
button will STOP playing.  
If the unit is not playing, pushing  
this button will OPEN the drawer.  
Example:  
To open the drawer while the unit  
is playing, push the button once to  
stop and once more to open.  
8
 
Display Features  
Track  
Time  
Playback Options  
Format  
Volume  
Transport Functions  
Display Functions  
The Wadia S7i Integrated CD Player / Decoding Computer features a large display screen. The top section shows  
the status of the transport. The bottom of the display indicates preamp functions, as described below.  
Turn-On Screen  
This screen is displayed each time the Wadia S7i Integrated CD Player / Decoding Computer is powered-up. After  
five seconds, the display will change to the Input screen with internal transport selected, then change again to  
the Volume screen with the volume set to Zero.  
S 7 i C D P l a y e r  
Input Screen  
The Input screen shows which input is currently selected. It also indicates whether ClockLink is engaged and the  
sampling frequency. If there is no signal connected to the selected input, the display will read, “No Data.”  
I n 1 :  
U S B A u d i o  
9
 
S7i Integrated CD Player / Decoding Computer  
Status Screen  
The Status screen indicates whether the status is Phase Normal or Inverted, and whether the CD was recorded  
using digital high frequency emphasis.  
Volume Screen  
The Volume screen shows the right and left channel volume level. If the output is muted, the display will indicate  
this by showing, “MUTE.”  
During normal listening, the display will show the default screen  
Changing Between Display Screens  
Anytime a button is pressed, the Wadia S7i Integrated CD Player / Decoding Computer display automatically  
switches to the appropriate screen to display the change. For example, pressing the balance controls on the  
remote control will switch the S7i Integrated CD Player / Decoding Computer display to the Balance screen.  
After five seconds, the display will return to the Volume screen.  
Also, pressing the enter button will cause the display to change to the next screen. Repeatedly pressing the enter  
button will cause the display to continue to change to successive screens (see the Menu Screen Map on page 16).  
Disc Formats  
The S7i Integrated CD Player / Decoding Computer will not only play CD's recorded in the Red Book CD standard  
(including CD-R and CD-RW), but it also can play discs recorded in several of the other popular formats: MP3,  
FLAC and WMA. The file format will display in the upper right hand corner of the display panel. If a disc with  
multiple formats (hybrid disc) is inserted, it will display HYBD.  
When you first load a MP3, FLAC or WMA encoded disc you will see the total track count along with a disc  
time of “00:00”. When the S7i Integrated CD Player / Decoding Computer is playing data discs, the user may  
skip tracks front and back with direct track access, using the number pad on the remote, available up to track  
999. In addition, the time display options become non-operational, the S7i Integrated CD Player / Decoding  
Computer will only display the time played on the track, not the time remaining for the track or the whole disc.  
10  
 
Remote Control Operation  
The Wadia S7i Integrated CD Player / Decoding Computer remote control requires a CR3032 battery. The battery  
should already be inside the remote. You will need to remove the plastic battery protector from the battery  
chamber for the remote to work.  
L
R
display  
input  
Balance Left-Right  
Phase Invert / Enter  
Program / Mode  
Display On-Off  
Input  
phase  
enter  
mode  
program  
Repeat  
1
4
7
2
5
3
6
9
Key Pad  
8
Search Back  
Stop / Volume Up  
Track Back / Mute  
Drawer Open-Close  
Search Forward  
Play  
0
mute  
I
S
Track Forward  
Volume Down / Pause  
S
M
SS  
Adjusting the Volume  
Whenever the volume control buttons are pressed, the volume for both channels will be increased or decreased  
by an increment of 1 on the display screen. The range of the volume control is from 1 to 100, with each step  
representing 0.5 dB change in volume.  
Adjusting the Balance  
Relative volume of each channel can be adjusted via the balance control buttons on the remote. Pressing one  
of the balance buttons increases the volume on that channel relative to the other by an increment of 0.2 on the  
display. This corresponds to a 0.1dB change. The next time the button is pressed the opposite channel is decreased.  
This way the overall volume level (the sum of the two channels) remains constant within 0.1dB.  
11  
 
S7i Integrated CD Player / Decoding Computer  
Selecting an Input  
The Wadia S7i Integrated CD Player / Decoding Computer has four digital inputs, plus the internal drive. Any of  
the inputs can be selected from the remote control by pressing the input button. Each time the input button is  
pressed, the next input is selected. For example, if you are listening to internal drive and you press the input  
select, Input 1 will be selected, press it again, and Input 2 will be selected and so on. After Input 4, the list will  
begin again with the internal drive.  
Whenever you select a new input, the display will switch to the Input Screen.  
Inverting Absolute Phase  
The Wadia S7i Integrated CD Player / Decoding Computer has the ability to invert absolute phase in the digital  
domain. Pressing the Phase Invert button  
on the remote control will cause the Wadia S7i Integrated CD  
Player / Decoding Computer to invert phase; pressing it again will switch the phase back to normal. If the Wadia  
S7i Integrated CD Player / Decoding Computer is in Phase Invert mode, this will be indicated on the Input Screen  
of the display.  
Display On/Off  
By pressing the Display On or Off button, the Wadia S7i Integrated CD Player / Decoding Computer display can  
be turned off completely.  
Mute Modes  
The Wadia S7i Integrated CD Player / Decoding Computer has two mute modes that are automatically implemented  
under different circumstances.  
DSP-Software Mute  
When the Mute button is pressed on the remote control, the Wadia S7i Integrated CD Player / Decoding  
Computers DSP engine transmits a stream of zero signal level samples to the DAC section, which results in  
zero output.  
Output-Relay Mute  
The Wadia S7i Integrated CD Player / Decoding Computer has a mute relay connection between the positive  
and negative outputs, when this relay is engaged, it connects the positive output to the negative output,  
reducing the output to zero. This relay, which produces an audible click when it engages or disengages, is  
not in the music signal path. The mute relay is engaged:  
• When the Wadia S7i Integrated CD Player/Decoding Computer detects AC input level below its minimum  
operating range.  
• Each time the Wadia S7i Integrated CD Player / Decoding Computer power switch is turned on.  
• When the volume control is set to zero AND the mute button on the remote control is pressed. When  
the Wadia S7i Integrated CD Player / Decoding Computer is in either Mute Mode, the Volume Screen will  
indicate this by displaying the word, “MUTE.”  
Direct Track Access  
Use the number pad on the remote to directly access individual tracks.  
12  
 
TRACK BACK/FORWARD  
SEARCH BACK/FORWARD  
: Pressing these buttons allows access to the previous or next track on a CD.  
: Pressing these buttons allows fast reverse or fast forward access through  
a track. Pressing the PLAY button to resumes normal playback.  
STOP : Pressing this button while a CD is playing stops PLAY.  
PAUSE : Pressing this button, while a CD is playing, suspends PLAY. Pressing the PLAY button will resume  
play at the point where the pause button was pressed.  
PLAY : After a CD has been loaded, pressing this button plays the CD beginning with the first track.  
REPEAT : This button controls two repeat modes: Repeat track and repeat all. Pressing the button once  
will cause the individual track to repeat. Pressing the button a second time will cause the entire CD to  
repeat continuously. A third button press returns the system to “no repeat” mode.  
ENTER: See Configuring digital inputs and selecting an algorithm on page 16.  
13  
 
S7i Integrated CD Player / Decoding Computer  
Theory of Operation  
Using ClockLink with an External Processor  
ClockLink eliminates jitter added when the clock signal is recovered from the digital data stream. In a  
non-ClockLink system, jitter is added when the clock signal is embedded in the data stream and transmitted  
to the DAC. When the clock signal is recovered from the data stream (as shown below), and used to clock  
the DAC output, this jitter degrades the sonic performance.  
Data and Clock to DAC  
Transport  
DAC  
Jitter Added  
Conventional CD Player  
With ClockLink, the clock is not recovered from the data. Instead, the master clock is located at the DAC. This  
clock signal is transmitted to the transport to keep it synchronized with the DAC. Because the recovered clock is  
ignored, any jitter on that signal does not affect the sonic performance.  
Data to DAC  
Transport  
DAC  
Clock to Transport  
CD Player with ClockLink  
Digital inputs and outputs can be used with a digital signal processor such as a digital equalizer. Digital processors  
allow the signal to be modified without adding analog noise and distortion. However, digital processors can add  
jitter, as shown below, causing noticeable sonic degradation.  
Data and Clock to DAC  
Digital  
Processor  
Digital  
Output  
Digital  
Input  
Jitter Added  
Transport  
DAC  
Conventional CD Player with an External Digital Processor  
Using ClockLink with an external processor, the Wadia S7i Integrated CD Player / Decoding Computer ignores  
the incoming clock and uses the master oscillator at the DAC. As a result, jitter added by the external digital  
processor does not affect sonic performance.  
Data to DAC  
Digital  
Processor  
Digital  
Output  
Digital  
Input  
Transport  
DAC  
Clock to Transport  
CD Player with ClockLink with an External Digital Processor  
14  
 
Configuring Digital Inputs for ClockLink  
To utilize ClockLink with an external processor, the Wadia S7i Integrated CD Player / Decoding Computer digital  
inputs must be configured for ClockLink as described below.  
Use the Enter button to scroll through the display menus until you reach the configuration menu for the input  
you wish to configure. Shown below is the configuration menu for Input 1:  
Use the Volume Up or Volume Down button to change to ClockLink ON. Press the Mute button to save  
the configuration.  
Note: Using ClockLink with a source other than the internal transport will result in unpredictable,  
degraded performance.  
!
!
ClockLink should only be used when using an external processor which is being fed by the Wadia S7i Integrated  
CD Player / Decoding Computer internal transport. For all other applications, inputs should be configured with  
ClockLink OFF.  
The Wadia S7i Integrated CD Player / Decoding Computer has several features to prevent ClockLink from being  
engaged when it should not be. First, whenever the input signal is other than 44.1 kHz sampling frequency, the  
Wadia S7i Integrated CD Player / Decoding Computer will automatically revert to recovered clock mode. Second,  
if the internal transport is not running, the Wadia S7i Integrated CD Player / Decoding Computer will revert to  
recovered clock mode.  
Note: All inputs on the Wadia S7i Integrated CD Player/Decoding Computer are factory configured for  
ClockLink OFF.  
ClockLink Status Indication  
When the Wadia S7i Integrated CD Player / Decoding Computer is operating in ClockLink mode, the Input screen  
will indicate as shown below:  
I n 1 :  
U S B A u d i o  
Even if an input is configured for ClockLink, the Status screen will only indicate ClockLink if it is currently  
engaged. For example, if an input is configured for ClockLink, and the Wadia S7i Integrated CD Player /  
Decoding Computer’s internal transport is turned off, then the display will not indicate ClockLink.  
15  
 
S7i Integrated CD Player / Decoding Computer  
Menu Screen Map  
Volume Screen  
Enter  
Enter  
Enter  
Enter  
Enter  
Enter  
Enter  
Enter  
Enter  
N+Enter  
Balance Screen  
Status Screen  
Input Screen  
Mute  
Mute  
Mute  
Mute  
Mute  
Y+Enter  
16  
 
Digital Algorithms  
In the Wadia S7i Integrated CD Player / Decoding Computer there are three user-selectable digital algorithms  
that can be used to optimize the sonic performance based on system matching and personal musical priorities.  
The three algorithms in the Wadia S7i Integrated CD Player/Decoding Computer all upsample to 32x the input rate  
(at 24 bit/1.4112 MHz DAC sample rate), but differ in their time and frequency domain characteristics. They are:  
Algorithm A Digimaster v2.5. Wadias classic time-domain interpolation algorithm delivers a robust sound  
with extraordinary image Focus and re-creation of recorded space.  
Algorithm B Provides a more extended top end than Algorithm A, with superior time-domain performance  
compared to conventional CD filters.  
Algorithm C Retains the high frequency extension and superior detail resolution of Algorithm B, but with a  
more relaxed presentation overall.  
The selected algorithm is used for 44.1 kHz (CD) and 48 kHz sources, either from the internal transport or any of  
the four digital inputs. For 88.2 kHz and 96 kHz sources, Digimaster v2.5 is always used as it provides the best  
performance at high-sample rates.  
We encourage you to become familiar with the unique sonic performance of each of these algorithms and enjoy  
the one that brings you optimum musical pleasure.  
Selecting an Algorithm  
To change the digital processing algorithm, press the Enter button on the remote control repeatedly to bring up  
this configuration screen:  
The selected algorithm is shown on the second line of the display. Use the Up and Down Volume buttons to  
scroll to the desired algorithm, then either press the Mute button or the Enter button to navigate to the ‘Save  
Changes?’ screen and choose ‘Yes’. The display will indicate ‘CONFIGURATION STORED’ and the output of  
the Wadia S7i Integrated CD Player/Decoding Computer will mute for 5-10 seconds while the selected algorithm  
is downloaded to the two DSP computers.  
Performing an Algorithm Comparison  
When comparing processing algorithms it is important to adjust the volume to compensate for the different  
gains of the algorithms. Without this adjustment the one which is louder will usually sound better in a short-term  
A/B comparison.  
In the Wadia S7i Integrated CD Player / Decoding Computer, algorithm A is approximately 1db higher output level  
than B and C (which are within 0.1 db of each other). To compensate for this higher output level, increase the  
indicated volume setting by 2 units for algorithms B and C when comparing them to A.  
17  
 
S7i Integrated CD Player / Decoding Computer  
Appendices  
TroubleShooting: Lock-up  
If the Wadia S7i Integrated CD Player / Decoding Computer experiences a powerful static shock or sudden AC  
surge, it is possible to “lock-up” the computer circuitry. A locked-up computer may result in erratic display, no  
output, and no response to remote commands.  
If your Wadia S7i Integrated CD Player / Decoding Computer should lock-up, unplug the AC cord. Wait at least 30  
seconds before replugging in the unit. If the unit still does not operate normally, contact your dealer.  
Using Data Discs  
We have noticed when making FLAC discs for the Wadia S7i Integrated CD Player / Decoding Computer with  
Microsoft Vista, you need to use a third party CD burning program (ie: Easy CD Creator, Media Monkey). If you  
use Vista’s CD burning software, the CD is not properly closed so the Wadia S7i Integrated CD Player / Decoding  
Computer cannot read the files. We have not experienced any issues with Windows XP making FLAC data CD’s.  
We have also found no issues with a MAC OSX making the burn. The Wadia S7i Integrated CD Player /  
Decoding Computer will accept FLAC files up to 24/96 sample rates.  
Software License Agreement  
IMPORTANT! THIS AGREEMENT SETS FORTH TERMS AND CONDITIONS FOR THE DigiMaster SOFTWARE.  
The DigiMaster software is copyrighted and patented. It is the property of Wadia Digital.  
Title to Licensed Software is not transferred to the customer. The customer is granted a nonexclusive license to  
use the Licensed Software only on this Wadia S7i Integrated CD Player / Decoding Computer.  
At Wadia’s sole Discretion, Wadia may provide customer with updates of the Licensed Software. Wadia retains  
the right to provide the Licensed Software updates for a fee. The customer may refuse to accept such Licensed  
Software updates.  
Environmental Care  
Wadia makes every effort to be an environmentally conservative company. We appreciate it if our customers  
join our efforts. Please dispose of batteries in a manner that is environmentally responsible.  
18  
 
Technical Specifications  
Decoding Software  
3 user selectable upsampling algorithms including DigiMaster v2.5  
Digital Processing Capability  
Digital Resolution  
1 - 24 Bits  
21 Bits  
Compatible Formats  
Red Book CD, CD-R, CD-RW, MP3, FLAC (up to 24/96) and WMA  
(will not play WMA lossless)  
Analog Outputs  
Digital Outputs  
Digital Inputs  
One pair of Balanced (XLR); One pair of Unbalanced (RCA). Both can be  
used simultaneously  
1 - Glass Fiber-Optic (ST), 1 - AES/EBU (XLR), 1 - SP/DIF (BNC),  
1 - Plastic Optical (Toslink)  
1 - USB (B1), 1 - AES/EBU (XLR), 1 - SP/DIF (BNC),  
1 - Plastic Optical (Toslink)  
Output Impedance  
Power Consumption  
Weight  
51 ohms  
58 watts  
55 lb. (25kg) Unit itself; 62 lb. (28kg) Shipping Weight  
17˝ Wide, 16.5˝ Deep, 7˝ High (including spiked feet)  
Dimensions  
19  
 
S7i Integrated CD Player / Decoding Computer  
Safety Precautions  
! IMPORTANT SAFETY PRECAUTIONS !  
!
To get the best performance from your Wadia S7i Integrated CD Player / Decoding Computer, and for your own  
safety, please read and follow these important safety instructions.  
1 Before operating the Wadia S7i Integrated CD Player / Decoding Computer please read all operating and  
safety instructions.  
2 Never place the Wadia S7i Integrated CD Player / Decoding Computer near heat sources such as radiators,  
fireplaces, stove, or other appliances that produce heat. Avoid placing the Wadia S7i Integrated CD Player /  
Decoding Computer where it will be subject to direct sunlight or low temperatures.  
3 This product is equipped with a three prong AC power cord which includes an earth ground connection. To  
prevent shock hazard, all three connectors must always be used. If your electrical outlets will not accept this  
type of plug, an adapter may be purchased. If an adapter is necessary, be sure it is an approved type and  
that it is used properly, supplying an earth ground. If you are not sure of the integrity of your home’s electrical  
system, contact a licensed electrician for assistance.  
4 AC extension cords are not recommended for use with this product. If an extension cord must be used, be  
sure it is an approved type and has sufficient current carrying capacity to power this product.  
5 Before cleaning the Wadia S7i Integrated CD Player / Decoding Computer, always disconnect the power  
supply cord. Use a soft cloth and, if necessary, dampen with plain water. Never apply water, or any other  
cleaner, directly to the chassis.  
6 If you smell smoke, or an abnormal smell, immediately unplug the Wadia S7i Integrated CD Player /  
Decoding Computer from the power supply and contact your Wadia dealer.  
7 Unplug unit if it becomes wet.  
8 Replace fuse only with the exact type originally included.  
100 volt: (1) 1 amp Slo-Blo  
120 volt: (1) 1 amp Slo-Blo  
220 volt: (2) 1/2 amp Slo-Blo  
240 volt: (2) 1/2 amp Slo-Blo  
9 THERE ARE NO USER SERVICEABLE PARTS INSIDE THE WADIA S7i INTEGRATED CD PLAYER /  
DECODING COMPUTER!  
• Do not attempt to repair or modify your Wadia S7i Integrated CD Player / Decoding Computer.  
• All service should be performed by qualified service personnel.  
• Do not open the unit while it is attached to the AC outlet.  
w w w . w a d i a . c o m  
 
 

TDK Network Card iPB Series User Manual
Teledyne Oxygen Equipment 3300PA User Manual
Terraillon Pedicure Spa IPX4 User Manual
TIMEX Weather Products Robotics RF 63 User Manual
Toastmaster Electric Heater 9451 HP34CDNF User Manual
Tunturi Home Gym ALPHA 15O User Manual
Uniden Network Router UIP1868P User Manual
Viking Range CRVDD330R User Manual
VistaQuest Digital Camera VQ 7015 User Manual
Wagner SprayTech Paint Sprayer 9145 User Manual