REFRIGERATION
Built-In 30”W. All Freezer
Standard Features & Accessories
All models include
• Capacity—15.9 cu. ft. (450.0 L)
• Full-extension precision ball-bearing
glides on all baskets and drawers
• Adjustable door stops standard—90°,
110°, or 120° swing
o 84”H./24”D.
• ProChill™ Temperature Management
System
• Three adjustable aluminum door bins
with tempered glass front
• Adaptive defrost
• All-metal freezer interior
• Top-mounted and front-venting sealed
refrigeration system
• Dual magnet and spring-assisted door
closer mechanism
• Robust, heavy-duty door hinges
• Power interruption switch to turn off
all power
• Automatic energy-saving exterior
moisture control
• Open door alarm sounds and glows to
warn that door has been ajar for three
minutes
• Sabbath Mode
• For installation of two units together,
separate grille kit must be purchased
• Must be ordered right or left hinge.
(As you face unit, RIGHT has hinge on
right side and handle on left side;
LEFT has hinge on left side and
handle on right side.)
o
Variable-speed single compressor
system includes the quietest, most
technologically advanced
compression available
o
o
Electronic controls maintain the
temperature selection within 1ºF
Multi-channel airflow system
removes odors and excess humidity
• Six adjustable half-width wire shelves
• One full-width metal shelf
• Two full-width slide-out wire baskets
• Factory-installed automatic ice maker
• One full-width ice storage drawer with
two metal ice bins
Model Options
VCFB304
Professional
DDFB304
Designer
DFFB304
Custom Front
FINISH DETAILS FOR VCFB MODEL
• Stainless Steel (SS), Black (BK), White
(WH), Metallic Silver (MS), Graphite
Gray (GG), Stone Gray (SG), Taupe
(TP), Biscuit (BT), Cotton White (CW),
Oyster Gray (OG), Golden Mist (GM),
Lemonade (LE), Sage (SA), Mint Julep
(MJ), Sea Glass (SE), Iridescent Blue
(IB), Viking Blue (VB), Pumpkin (PM),
Racing Red (RR), Apple Red (AR),
Burgundy (BU), Plum (PL), Chocolate
(CH), and Cobalt Blue (CB).
FINISH DETAILS FOR DDFB MODEL
• Stainless Steel (SS), Black (BK), White
(WH), Metallic Silver (MS), Graphite
Gray (GG), Stone Gray (SG), Taupe
(TP), Biscuit (BT), Cotton White (CW),
Oyster Gray (OG), Golden Mist (GM),
Lemonade (LE), Sage (SA), Mint Julep
(MJ), Sea Glass (SE), Iridescent Blue
(IB), Viking Blue (VB), Pumpkin (PM),
Racing Red (RR), Apple Red (AR),
Burgundy (BU), Plum (PL), Chocolate
(CH), and Cobalt Blue (CB).
FINISH DETAILS FOR DFFB MODEL
• Handle not included—opt for custom
handle, or purchase a Viking
Professional Series or Designer Series
handle kit (see Installation Notes &
Accessories).
• See Custom Panels section for more
information and additional
specifications.
• Finish codes designate door front.
Stainless steel upper grille, side trim,
and handle (with chrome-plated
brackets); black lower kickplate.
• Brass Trim Option (BR)—nameplate,
handle/brackets, and side trim. Brass
components have a durable protective
coating for maintenance-free normal
use.
• Finish codes designate door front.
Stainless steel upper grille, side trim,
and handle, with black lower kickplate.
• Brass Trim Option (BR)—handle. Brass
components have a durable protective
coating for maintenance-free normal
use.
ORDERING INSTRUCTIONS
First specify model number, followed by hinge preference (“R” for right or “L” for left), and then color code (VCFB304RSS).
If ordering optional brass trim, specify code at end (VCFB304RSSBR).
PLANNING AND DESIGN GUIDE
RELEASED 12/1/07
©2007 VRC— INFORMATION SUBJECT TO CHANGE
V I K I N G R A N G E . C O M
•
1 - 8 8 8 - V I K I N G 1
REFRIGERATION
Built-In 30”W. All Freezer
Dimensions & Specifications
DOOR SWING
• Adjustable door stops standard—90°, 110°, or 120° swing
VCFB304
Professional
DDFB304
Designer
DFFB304
Custom Front
See Custom Panels section for
more information and additional
specifications.
30”
(76.2 cm)
29”
(73.7 cm)
15-27/32”
(40.2 cm)
11-7/8”
(30.2 cm)
24-11/16”
(62.7 cm)
3-1/32”
(7.7 cm)
52-3/8”
(133.0 cm)
51”
(129.5 cm)
49-1/16”
(124.6 cm)
0
90.0
0
110.0
0
120.0
2-1/2”
(6.4 cm)
PROFESSIONAL
30”
(76.2 cm)
29”
(73.7 cm)
15-3/32”
(38.3 cm)
10-31/32”
(27.9 cm)
24”
(61.0 cm)
1-27/32”
(4.7 cm)
52-11/32
(132.9 cm
51”
(129.5 cm)
49-1/16”
(124.6 cm)
0
90.0
0
110.0
0
120.0
2-1/16”
(5.2 cm)
DESIGNER
PLANNING AND DESIGN GUIDE
RELEASED 12/1/07
©2007 VRC— INFORMATION SUBJECT TO CHANGE
V I K I N G R A N G E . C O M
•
1 - 8 8 8 - V I K I N G 1
REFRIGERATION
Built-In 30”W. All Freezer
Dimensions & Specifications
CLEARANCE DIMENSIONS—PROFESSIONAL
TOP VIEW
Wall
1-13/16”
(4.6 cm)
space if 24” standard
cabinet depth is used
24”
(61.0 cm)
standard cabinet depth
3/4”
(1.9 cm)
full end panel
Countertop
overhang
Door
2-1/2”
(6.4 cm) offset
TOP VIEW
Wall
1-13/16”
24”
(4.6 cm)
(61.0 cm)
standard
cabinet
depth
space if 24” standard
cabinet depth is used
3/4”
(1.9 cm)
full end panel
5/16”
(0.8 cm)
Door
2-1/2”
(6.4 cm) offset
TOP VIEW
Wall
1-13/16”
(4.6 cm)
space if 24” standard
cabinet depth is used
24”
(61.0 cm)
standard cabinet depth
3/4”
(1.9 cm)
full end panel
Partial overlay
cabinet door
Door
2-1/2”
(6.4 cm) offset
PLANNING AND DESIGN GUIDE
RELEASED 12/1/07
©2007 VRC— INFORMATION SUBJECT TO CHANGE
V I K I N G R A N G E . C O M
•
1 - 8 8 8 - V I K I N G 1
REFRIGERATION
Built-In 30”W. All Freezer
Dimensions & Specifications
CLEARANCE DIMENSIONS—DESIGNER
TOP VIEW
Wall
1”
(2.5 cm)
if 25” (63.5 cm)
cabinet depth is used
25”
(63.5 cm)
countertop
depth
24”
(61.0 cm)
standard
cabinet
depth
3/4”
(1.9 cm)
full end panel
Door
Flush
TOP VIEW
Wall
1”
(2.5 cm)
if 25” (63.5 cm)
cabinet depth is used
25”
3/4”
(63.5 cm)
(1.9 cm)
full end panel
Door
Flush
TOP VIEW
Overlapping cabinet doors
Wall
1”
(2.5 cm)
if 25” (63.5 cm)
cabinet depthis used
24-3/4”
(62.9 cm)
3/4”
(1.9 cm)
full end panel
24”
(61.0 c
standar
cabinet
depth
m)
d
Cabinet
door
Door
Flush
PLANNING AND DESIGN GUIDE
RELEASED 12/1/07
©2007 VRC— INFORMATION SUBJECT TO CHANGE
V I K I N G R A N G E . C O M
•
1 - 8 8 8 - V I K I N G 1
REFRIGERATION
Built-In 30”W. All Freezer
Installation Requirements
UTILITY
REQUIREMENTS
ACCESS REQUIREMENTS – Single Installation
GAS
Not applicable
VCFB304
Professional
DDFB304
Designer
DFFB304
Custom Front
ELECTRICAL
• Three-wire cord
with grounded
three-prong plug
attached to
See Custom Panels section for
more information and additional
specifications.
24”*
(61.0 cm)
Anti-tip boar
min.
d
6”
(15.2 cm)
product
• 115 VAC/60 Hz;
15 amp
dedicated circuit
• Maximum amp
usage—9.1
9”
(22.9 cm)
9”
(22.9 cm)
• Estimated
energy usage—
601 kWh/year
82-
7/8”
(210.5
anti-
cm) mi
tip boar n.
opening height
ELECTRIC OUTLET LOCATION
d &
84-1/16”
(213.5
cm) max.
ip boar
anti-t
opening h
d &
73-3/8”
eight
(186.4 cm)
PLUMBING
• Inlet waterline
requirements—
1/4”copper
tubing
7-5/8”
(19
.4 cm)
6-3/4”
(17
5/8”
(1.
.1 cm)
5
cm)
29-1/2”
(74.9
3”
(7.6 cm)
cm
) min.
to
29-3/4”
(75.6
cm)
fession
Pr
o
max.
5/8
3-5
/8”
m)
Design
”
• 20 psi min.;
120 psi max.
al
(9.
(1.
30”
cm)
2 c
(7
6.2
5 cm)
e
r/Cus
1”
(2.5 cm
)
t
om Fr
ont
10-3/4
(27.3 cm)
10-1/2”
(26
.7 cm)
5/8”
(1.5 cm)
”
Optional floo
wat
er lin
e e
r
ntry
*Custom front models fit flush in 25”-deep (63.5 cm)
cabinet openings. They can be installed in standard
24”-deep openings. The door faces and top grille
will protrude 3/4” (1.9 cm) into the room.
WATER LINE ENTRY AREA
Shown for All Freezer only
VCFB304
DDFB304
DFFB304
Cutout width
29-1/2” (74.9 cm) min. to
30” (76.2 cm)
30” (76.2 cm)
29-3/4” (75.6 cm) max.
Cutout height
Cutout depth
82-7/8” (210.5 cm) min. to 84-1/16” (213.5 cm) max.
24” (61.0 cm) min.*
PLANNING AND DESIGN GUIDE
RELEASED 12/1/07
©2007 VRC— INFORMATION SUBJECT TO CHANGE
V I K I N G R A N G E . C O M
•
1 - 8 8 8 - V I K I N G 1
REFRIGERATION
Built-In 30”W. All Freezer
Installation Requirements
ACCESS REQUIREMENTS – Dual Installation
6”
See anti-tip boar
(15.2 cm)
d installation
24”*
(61.0 cm)
9”
(22.9 cm)
9”
(22.9 c
m)
ELECTRIC OUTLET LOCATION
82-7/8”
(21
0.5 cm)
anti-t
min.
ip boar
opening height
d &
73-3/8”
(186.4 cm)
84-1/16”
(213.5 cm) max.
7-5/8”
anti-tip boar
(19.4 cm)
6-3/4”
opening height
5/8”
(1.
(
17.1
d &
cm)
5 cm)
3”
(7.6 cm)
5/8”
3-5/8”
(1.5 cm)
(
9.2
cm
)
10-3/4”
(27
.3
10-1
26.7 c
(
/
m)
2
”
cm
)
5/8”
cm)
1”
(2.5
(
1.
cm)
5
Op
water
tio
nal
line
fl
o
or
entry
59
-
60” Des
1/2”
Pr
(151.1
ofession
cm
igner/
(152
.4 cm)
C
)
om
ust
a
l
Fr
ont
30”/30” FREEZER/
REFRIGERATOR COMBINATION
WATER LINE ENTRY AREA
Note: cutout opening shown with All Freezer model on left.
Reverse water line entry if All Freezer model is on right
6”
(15.2 cm)
See anti-tip boar
d ins
24”*
(61.0 cm)
tallation
9”
(22.9 cm)
9”
(22.9 c
m)
ELECTRIC OUTLET LOCATION
82-7/8”
(210.5 c
m) min.
anti-tip boar
opening height
d &
73-3/8”
(186.4
cm)
84-1/16”
(213.5 cm) ma
7-5/8”
anti-tip boar
(19.4
6-3/4”
x.
cm)
ope
5
/8”
(17.1 cm)
d &
ning height
(1.5 cm
3
”
)
(7.6 c
m)
5/8”
m)
3-
5
/
8
cm
(1.5 c
(9.2
”
)
10-3/4”
(27
.3 cm)
10-1/
.
(
26
2
”
7
cm)
5
/
5 cm)
1”
(2.5
8”
(
1.
cm)
O
pt
iona
er line ent
w
a
t
l floor
ry
65
-
66” Desi
1/2”
P
(166.4 c
r
o
m
gne
(167 r/C
.6 cm)
fession
)
us
to
a
l
m
Fr
ont
30”/36” FREEZER/
REFRIGERATOR COMBINATION
WATER LINE ENTRY AREA
Reverse water line entry if All Freezer model is on right
Note: cutout opening shown with All Freezer model on left.
*Custom front models fit flush in 25”-deep (63.5 cm) cabinet openings. They can be installed in standard 24”-deep openings. The
door faces and top grille will protrude 3/4” (1.9 cm) into the room.
VCFB304/VCRB304
59-1/2” (151.1 cm)
DDFB304/DDRB304
60” (152.4 cm)
DFFB304/DFRB304
60” (152.4 cm)
Cutout width
Cutout height
Cutout depth
82-7/8” (210.5 cm) min. to 84-1/16” (213.5 cm) max.
24” (61.0 cm) min.*
VCFB304/VCRB364
65-1/2” (166.4 cm)
DDFB304/DDRB364
66” (167.6 cm)
DFFB304/DFRB364
66” (167.6 cm)
Cutout width
Cutout height
Cutout depth
82-7/8” (210.5 cm) min. to 84-1/16” (213.5 cm) max.
24” (61.0 cm) min.*
PLANNING AND DESIGN GUIDE
RELEASED 12/1/07
©2007 VRC— INFORMATION SUBJECT TO CHANGE
V I K I N G R A N G E . C O M
•
1 - 8 8 8 - V I K I N G 1
REFRIGERATION
Built-In 30”W. All Freezer
✪ Installation Notes & Accessories
Side Panel Kits
• Stainless Steel (SS)
• Panels provide finished, freestanding look; unit must still be secured to the wall
• Kit includes one panel and installation hardware
Model
PSSPL2
PSSPR2
DSSPL2
DSSPR2
Description
Approx. ship wt. lbs. (kg)
Professional side panel left
Professional side panel right
Designer side panel left
Designer side panel right
45 (20.2)
45 (20.2)
45 (20.2)
45 (20.2)
Side Panel Hardware Kit
• For use with Designer built-in refrigerator/freezers
• Hardware allows installation of custom side panels
• Kit includes brackets, screws, and installation instructions to mount panels on left and right side
Model
Description
Approx. ship wt. lbs. (kg)
SPHKDS
Side panel hardware
3 (1.4)
Top Panel Kit
• Stainless Steel (SS)
• Panel provides finished, freestanding look; unit must still be secured to the wall
• Kit includes one panel and installation hardware
Model
Description
Approx. ship wt. lbs. (kg)
TOP-30
30”W. top panel
21 (9.5)
Top Grille Kits
• Stainless Steel (SS)
• 60”W. top grille kit—for use with installation of two 30”W. all refrigerators/all freezers side-by-side
• 66”W. top grille kit—for use with installation of one 30”W. and one 36”W. all refrigerators/all freezers side-by-side
• Grille creates a single unit look
• Kit includes one full-length grille, center cabinet trim connector, and all installation hardware
Model
Description
Approx. ship wt. lbs. (kg)
PGK60-SS
PGK66-SS
DGK60-SS
DGK66-SS
Professional 60”W. grille (for two VCRB/VCFB units)
Professional 66”W. grille (for two VCRB/VCFB units)
Designer 60”W. grille (for two DDRB/DDFB/DFRB/DFFB units)
Designer 66”W. grille (for two DDRB/DDFB/DFRB/DFFB units)
21 (9.5)
23 (10.4)
21 (9.5)
23 (10.4)
Center Trim Kit
• Stainless Steel (SS)
• Kit includes center cabinet trim connector to install two custom front units with wood top grille
Model
Description
Approx. ship wt. lbs. (kg)
FCTK-SS
Center trim
5 (2.3)
PLANNING AND DESIGN GUIDE
RELEASED 12/1/07
©2007 VRC— INFORMATION SUBJECT TO CHANGE
V I K I N G R A N G E . C O M
•
1 - 8 8 8 - V I K I N G 1
REFRIGERATION
Built-In 30”W. All Freezer
Handle Kits
• For use with custom front freezers
• For use on locally supplied custom front panels
• Handles allow refrigerator/freezers with custom front panel to coordinate with other Professional and Designer products
• Kit includes handle(s) and installation hardware
Model
Description
Approx. ship wt. lbs. (kg)
PHK26-SS
PHK26-BR
DHK25-SS
DHK25-BR
PHKDFBB-SS
PHKDFBB-SS
HKFDSS-SS
HKFDS-BR
Professional one handle (Stainless Steel)
Professional one handle (Brass)
Designer one handle (Stainless Steel)
Designer one handle (Brass)
7 (3.2)
7 (3.2)
7 (3.2)
7 (3.2)
Professional two handles (Stainless Steel)
Professional two handles (Brass)
Designer two handles (Stainless Steel)
Designer two handles (Brass)
10 (4.5)
10 (4.5)
10 (4.5)
10 (4.5)
Compliance Information
WARRANTY SUMMARY*
• Two-year full warranty—complete unit
• Six-year full warranty—sealed refrigeration system
• Twelve-year limited warranty—sealed refrigeration system (includes compressor, condenser,
dryer/strainer, evaporator, and connecting tubing)
• Ninety-day limited warranty—cosmetic parts such as glass, painted, and decorative items
*For complete warranty see Use & Care Guide. Warranty valid on Viking products shipped within the United States and Canada.
PLANNING AND DESIGN GUIDE
RELEASED 12/1/07
©2007 VRC— INFORMATION SUBJECT TO CHANGE
V I K I N G R A N G E . C O M
•
1 - 8 8 8 - V I K I N G 1
|