ViewMate™
Optical Mouse
MC208
User Guide
Guide de l’utilisateur
Bedienungsanleitung
Guida dell’utente
使用手册
使用手册
With Plug & Play✘
Getting Started
Congratulations on purchasing a ViewSonic® ViewMate™ Optical Mouse.
Important! Save the original box and all packing material for future shipping
needs.
Package Contents
• USB optical mouse with PS/2 adapter
• Mouse driver on CD Wizard with user guide
Requirements
• The mouse driver supports Microsoft® Windows 95/98/Me/2000/XP/.
Windows NT4.0 or later.
• The USB interface supports Microsoft Windows 98/Me/2000/XP.
• Pentium 133 or higher PC (recommended).
• 32 MB RAM minimum in your PC system.
• USB or PS/2 port.
• CD wizard for software installation.
Ergonomic Safety Precautions
Some experts believe that repeated use of any mouse or keyboard may cause
serious injury to hands, wrists, arms, neck, and/or back. If you feel pain in any of
these areas, see a qualified health professional. To reduce risk of injury, please
follow these precautions:
• Take frequent breaks from working on the computer. Get up and walk around
several times each hour.
• Vary your tasks throughout the day.
• Keep your shoulders relaxed with your elbows at your side. Position yourself
so that you do not have to reach for the keyboard or mouse.
• Adjust your chair and keyboard so that your upper arms and wrists are level
with the desktop.
• Avoid letting your wrist to rest on sharp edges.
ViewSonic ViewMateT M Optical Mouse MC208
2
Quick Setup
You can choose either standard mouse features shown below or the optional
special program features for your ViewSonic Optical Mouse. For special
program features, see the section on the next page, “Adding Special Program
Features (optional)”. The standard mouse features with a USB or PS/2
connection are shown below.
Standard Mouse Features
Right-click button
Scroll wheel
Left-click button
Installing the mouse using a USB Connection
USB connection
1 Leave your PC turned on. Plug the mouse with a USB Connection to a USB
port on your computer.
2 A message appears on-screen to Add New Hardware Wizard > click Next.
3 Select Search for the best driver for your device > click Next > Next > Next.
A message appears “Please insert disk labeled Windows CD ROM” > click
“OK.”
4 Navigate/browse to the mouse driver folder (may already be on your hard
drive or on the CD ROM that has your current Windows OS). Then, select an
appropriate driver and click OK. Then click Finish.
Installation is now complete with standard mouse features.
ViewSonic ViewMateT M Optical Mouse MC208
3
Installing the mouse using a PS/2 Adapter Connection
PS/2 Adapter (green)
USB connection
1 Turn off your PC.
2 Plug the mouse with a PS/2 Adapter Connection into the PS/2 port on your
computer.
3 Turn on your PC and monitor. Installation is now complete with standard
mouse features.
Adding Special Program Features
(optional)
To add special program features to your ViewSonic Optical Mouse MC208,
install the mouse driver as follows:
1 Insert the disk that came with your ViewSonic Optical Mouse into your
computer’s disk drive.
2 Follow the instructions on the screen to finish the software installation
TTMM
ViewSonic ViewMate
Optical Mouse MC208
4
MouseMate Software Features
To change from Office EasyJump mode to Traditional
EasyJump mode, just click the right button on the ViewSonic
logo in the center of the EasyJump Frisbee.
The “Traditional EasyJump” lets you use eight Cyber
functions more easily and quickly.
Once you press the button you assigned, the “EasyJump”
Frisbee will pop up and eight functions will be displayed
on Frisbee.
Click this button to close the current window.
Click this button and the cursor will jump to the horizontal scrollbar. When
you move your mouse, the open document or spreadsheet will scroll horizon-
tally.
Click this button and the cursor will jump to the vertical scrollbar. When you
move your mouse, the open document or spreadsheet will scroll vertically.
Click this button to open the Start Menu.
Click this button to open the Help button.
Click this button to open the Genius Mouse Control Panel.
Click the button and you can move the mouse in any direction in a document
or a spreadsheet. The farther you move the pointer from the pan icon, the
faster you can pan in that direction.
The buttons in “EasyJump Options” are especially used for Internet. The default func-
tion is “Open Browser” (button
“EasyJump Options” in the
Control Panel. The functions in “EasyJump Options” are:
like ). You can select other functions from
“Settings” folder of the Genius Mouse
“Add to Favorite [IE] ”
“Add Bookmark [NetScape] ”
“Go Next [Forward] ”
“Run Application”
“Organize Favorite [IE] ”
“Edit Bookmark [NetScape] ”
“Go Previous [Back] ”
Switch Applications
When the right-button or Magic-Roller is set to “Switch AP”, you can quickly
switch from one open application to another without moving the mouse. To
switch to a specific application, press the the right button or the Magic-Roller to
select the application.
Zoom function for Office and IE Applications
Press the “Ctrl” key and move the “Magic-Roller” forward (or backward) to set
the Zoom In/Out function. You can also use just one hand to Zoom In/Out: set
the right button to be the “Ctrl” function, press the right button and move the
“Magic-Roller” forward (or backward) to enlarge (or decrease) the document
window.
Auto-Panning
You can set this function in the Button Assignment menu. Move the mouse, and
the document moves in the direction you just moved.
Uninstall the Software
Follow these instructions to remove the software from your hard disk. In Win-
dows, click on the Start button, select Programs and move to the mouse
software. Then click on Uninstall software.
Customize the Software
This section shows you how to customize the software. To open the software
control panel, you can double-click on the icon in the task bar or select the
“Software” icon from the program group.
Close the Software
Click the right button on the taskbar, and select “Close Software” to close the
software.
T M
ViewSonic ViewMate
Optical Mouse MC208
5
Customer Support
For technical support or product service, see the table below or contact your
reseller. Important: You will need the product serial number.
Country/
Region
Web site
T = Telephone
F = FAX
Email
support
United States
T: (800) 688-6688
service.us@
F: (909) 468-1202 viewsonic.com
support
Canada
T: (800) 688-6688
service.ca@
F: (909) 468-1202 viewsonic.com
Federal Communications Commission
(FCC) Notice
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy, and if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Warning
To assure continued FCC compliance, the user must use grounded power supply
cord and the provided shielded video interface cable with bonded ferrite cores. If
a BNC cable is going to be used, use only a shielded BNC(5) cable. Also, any
unauthorized changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this device.
ViewSonic ViewMateT M Optical Mouse MC208
6
LIMITED WARRANTY
VIEWSONIC KEYBOARD AND MOUSE
What the warranty covers:
ViewSonic® warrants its products to be free from defects in material and workmanship during the
warranty period. If a product proves to be defective in material or workmanship during the warranty
period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement
product or parts may include remanufactured or refurbished parts or components.
How long the warranty is effective:
ViewSonic Keyboard and Mouse (if included in package) are warranted for two (2) year for all parts and
two (2) year for all labor from the date of the first consumer purchase.
Who the warranty protects:
This warranty is valid only for the first consumer purchaser.
What the warranty does not cover:
1. Any product on which the serial number has been defaced, modified or removed.
2. Damage, deterioration or malfunction resulting from:
a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product
modification, or failure to follow instructions supplied with the product.
b. Repair or attempted repair by anyone not authorized by ViewSonic.
c. Any damage of the product due to shipment.
d. Removal or installation of the product.
e. Causes external to the product, such as electrical power fluctuations or failure.
f. Use of supplies or parts not meeting ViewSonic’s specifications.
g. Normal wear and tear.
h. Any other cause which does not relate to a product defect.
3. Removal, installation, and set-up service charges.
How to get service:
1. For information about receiving service under warranty, contact ViewSonic Customer Support. You
will need to provide your product's serial number.
2. To obtain service under warranty, you will be required to provide (a) the original dated sales slip,
(b) your name, (c) your address, (d) a description of the problem, and (e) the serial number of the
product.
3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic service
center or ViewSonic.
4. For additional information or the name of the nearest ViewSonic service center, contact ViewSonic.
Limitation of implied warranties:
THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, WHICH EXTEND BEYOND THE DESCRIPTION
CONTAINED HEREIN INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE.
Exclusion of damages:
VIEWSONIC'S LIABILITY IS LIMITED TO THE COST OF REPAIR OR REPLACEMENT OF THE PRODUCT.
VIEWSONIC SHALL NOT BE LIABLE FOR:
1. DAMAGE TO OTHER PROPERTY CAUSED BY ANY DEFECTS IN THE PRODUCT, DAMAGES BASED UPON
INCONVENIENCE, LOSS OF USE OF THE PRODUCT, LOSS OF TIME, LOSS OF PROFITS, LOSS OF BUSINESS
OPPORTUNITY, LOSS OF GOODWILL, INTERFERENCE WITH BUSINESS RELATIONSHIPS, OR OTHER
COMMERCIAL LOSS, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
2. ANY OTHER DAMAGES, WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE.
3. ANY CLAIM AGAINST THE CUSTOMER BY ANY OTHER PARTY.
Effect of state law:
This warranty gives you specific legal rights, and you may also have other rights which vary from state to
state. Some states do not allow limitations on implied warranties and/or do not allow the exclusion of
incidental or consequential damages, so the above limitations and exclusions may not apply to you.
Sales outside the U.S.A. and Canada:
For warranty information and service on ViewSonic products sold outside of the U.S.A. and Canada,
contact ViewSonic or your local ViewSonic dealer.
ViewSonic Keyboard and Mouse Warranty (V2.0)
Release Date: 02-19-2002
ViewSonic ViewMatT M Optical Mouse MC208
7
ViewSonic Corporation
|