Video Products Computer Hardware RJ45 5EWTP QR PCB User Manual

Aurora,Ohio 44202  
Fax: 330-562-1999  
VIDEO  
PRODUCTS  
INCORPORATED  
1275 Danner Drive  
Tel: 330-562-2622  
VPI  
Weatherproof Cable Shield Assembly Procedure  
For Outdoor CAT5/5e/6/6a Shielded Cable Installations  
The Weatherproof Cable Shield is a water-tight cable restraint to be applied to  
shielded Cat5/5e/6/6a cable to make a weatherproof cable connection to outdoor enclosures.  
To make sure the connection is waterproof upon completion, follow the steps below.  
1. Insert the seal ring into the housing.  
2. Strip the CATx shielded cable jacket (6mm-7mm O.D.) approximately ½” and insert the cable through the  
sealing nut, screw nut, and housing. (Note: Heat shrink tubing can be applied to cable to increase the O.D. to  
6mm-7mm.)  
housing  
screw nut  
sealing nut  
CATx cable  
strip approx. ½”  
Note: CATx cable  
used must be  
shielded cable.  
3. Terminate the CATx shielded cable with an RJ45 connector.  
 

Technika Flat Panel Television LCD19 915 User Manual
Toshiba Network Card MK1504GAL User Manual
Traulsen Refrigerator TR35786 User Manual
TRENDnet Network Router Super G Access Point User Manual
TRENDnet Security Camera KXTG7872S User Manual
Troy Bilt Trimmer TB20DC User Manual
Ultra Products Battery Charger ULT31922 User Manual
Uniden Two Way Radio POLARIS User Manual
Viking Refrigerator DFUR144 User Manual
Vision Fitness Treadmill T9500HRT Orbo User Manual