Vestax Musical Instrument PCV 275 User Manual

Professional Mixing Controller  
OWNER'S MANUAL  
VESTAX CORPORATION  
1-18-6 Wakabayashi, Setagaya-ku, Tokyo 154-0023 Japan  
Phone:03-3412-7011 Fax:03-3412-7013  
Web:www.vestax.jp  
VESTAX America  
15320 Valley View Road Unit 9 La Mirada,CA 90638  
Phone:1-562-623-9881,Fax:1-562-483-7304  
Web:www.vestaxdj.com  
(
)
VESTAX Europe Ltd.  
Unit 5 Riverwey Industrial Park Alton, Hampshire GU34 2QL England, U.K  
Phone:(0)1420-83000 Fax:(0)1420-80040  
Web:www.vestax.co.uk  
Vestax Technical Center of America  
8489 W.Third Street Ste.1044 Los Angeles CA 90048  
Phone:1-323-801-2111 Fax:1-323-801-2112  
Vestax Europe Technical Support  
Rheinstr.213 D-53332 Bornheim Germany  
Phone:49(0)2222-95-23-72 Fax:49(0)2222-95-23-74  
 
CAUT ION  
RIS K OF ELECTRIC S HOCK DO NOT OP EN  
CAUTl0 NTO REDUCE THE RlS K OF ELECTRlC S HOCK  
DO NOT REMOVE COVEROR BACK)  
NO US ER-S ERVICEABLE P ARTS INS IDE  
REFER S ERVlCING T0 QUALIFIED S ERVlCE P ERS ONNEL  
The lighting flash with arrowhead symbolwithin an equilateral triangleis intended  
to alert the user to the presence of uninsulateddangerous voltagewithin the product's  
enclosure that may be of sufficient magnitude to consitute a risk of electric shock to  
persons.  
The exclamation point within an equilateral triangle is intended to alert the user to the  
pr esence of impor tant oper ating and maintenanceser vicinginstr uctions in the  
literature accompanying the appliance.  
WARNING  
T0 REDUCE THE RIS K 0 F FIRE 0 R ELECTRlC S HOCKDO NOT EXP OS E  
THIS AP P LIANCE T0 RAIN 0 R M0 IS TURE.  
CAUTIONTO P REVENT ELECTRIC S HOCK,MATCH BLADE OF P LUG TO WIDE S LOTFULLY INS ERT  
ATTENTIONP 0 UR EVITER LES CH0 CS ELECTRIQUES INTRODUIRE LA LAME LA P LUS LARGE DE LA  
FICHE DANS LA BORNE CORRES P 0 NDANTE DE LA P RIS E ET P 0 US S ER J US QUAU F0 ND  
IM P O R T A N T S A F E T Y IN S T R U C T IO N S  
S A V E T H E S E IN S T R U C T IO N S  
WARNING : When using electric products, basic precaution should always be followed,  
including the following :  
1. Read all the instructions before using the product.  
8. The power - supply cord of the product should be unplugged  
from the outlet when left unused for a long period of time.  
2.  
Do not use this product near water - for example, near a  
bathtub, washbowl, kitchen sink, in a wet basement, or near a  
swimming pool, or the like.  
9.  
Care should be taken so that objects do not fall and liquids are  
not spilled into the enclosure through openings.  
The product should be serviced by qualified service personnel  
when ;  
3.  
4.  
10.  
This product should be used only with a cart or stand that is  
recommended by the manufacturer.  
This product, either alone or in combination with an amplifier  
and headphone or speakers, may be capable of producing  
sound levels that could cause permanent hearing loss. Do not  
operate for a long period of time at a high volume level or at a  
level that is uncomfortable. Without. you should consult an  
audiologist.  
A. The power - supply cord or the plug has been damaged ;  
B. Objects have fallen, or liquid has been spilled into the  
product ; or  
C. The product has been exposed to rain ; or  
D. The product does not appear to operate normally or  
exhibits a marked change in perfromance ; or  
E. The product has been dropped, or the enclosure damaged.  
5.  
6.  
The product should be location or position does not interfere  
with its proper ventilation.  
The product should be located away from heat sources such as  
radiators, heat registers, or other products that produce heat.  
11. Do not attempt to service the product beyond that described in  
the use - maintenance instructions. All other servicing should  
be referred to qualified service personnel.  
7. The product should be connected to a power supply only of the  
type described in operating instructions or as marked on the  
product.  
2
 
FUNCTIONS  
TOP PANEL  
MICROP HONE AND �  
S UBINP UT S ECTION  
P ROGRAM �  
INP UT S ECTION  
MAS TER �  
S ECTION  
LINE 4 IN  
PGM 1  
SUB  
PGM 2  
INPUT  
MASTER  
+8  
CUE  
INPUT  
INPUT  
+8  
+5  
+3  
+1  
0
L
R
PHONO 1  
LINE 2  
PHONO 2  
LINE 4  
PHONO 3  
LINE 6  
+5  
+3  
+1  
0
LINE 1  
LINE 3  
LINE 5  
MIC  
TRIM  
TRIM  
TRIM  
-1  
-1  
-3  
-3  
MIC-1  
MIC-1  
MIC-2  
-5  
-5  
MIN  
MAX  
MIN  
MAX  
MIN  
BAL  
MAX  
-7  
-7  
BAL  
BAL  
-10  
-15  
POWER  
-10  
-15  
POWER  
MIN  
MIC-2  
MAX  
MAX  
L
EQ  
R
L
EQ  
R
L
R
L
R
EQ  
HI  
HI  
HI  
EFFECT  
SEND  
MIN  
-16dB  
MID  
+16dB  
+12dB  
+16dB  
-16dB  
MID  
+16dB  
+12dB  
+16dB  
-16dB  
MID  
+16dB  
+12dB  
+16dB  
EQ  
HI  
MIN  
RETURN  
MAX  
-16dB  
+16dB  
+16dB  
-12dB  
LO  
-12dB  
LO  
-12dB  
LO  
MIN  
MAX  
ON  
LO  
-16dB  
CUE  
OFF  
-16dB  
-16dB  
-16dB  
EFFECT  
EFFECT  
EFFECT  
EFFECT  
MASTER  
BAL  
OFF  
CUE  
POST  
ON  
PRE  
OFF POST  
PRE  
OFF POST  
PRE  
OFF POST  
CUE  
CUE  
CUE  
L
R
OFF  
OFF  
ON  
OFF  
ON  
OFF  
ON  
SIGNAL  
SIGNAL  
SIGNAL  
LEVEL  
LEVEL  
LEVEL  
LEVEL  
MIN  
MAX  
10  
10  
9
8
7
6
5
4
3
2
1
0
10  
9
8
7
6
5
4
3
2
1
0
MONITOR  
9
8
7
6
5
4
3
2
1
0
SPLIT CUE  
ON  
OFF  
PHONES  
LEVEL  
IS OLATOR �  
S ECTION  
MIN  
MAX  
PHONES  
IN  
PGM1 ISOLATOR  
PGM2 ISOLATOR  
LO  
MID  
HI  
LO  
MID  
HI  
1
2
PHONES IN  
8
3
 
PROGRAM INPUT SECTION  
1
INPUT SELECTOR  
PGM 1  
Used to select input (2 line or 1 phono) to be sent to each PGM channel.  
INPUT  
PHONO 1  
LINE 2  
2
TRIM CONTROL  
1
Adjusts the Input level of each channel. Set INPUT FADER to 7-8position. adjust  
TRIM so that the INPUT LEVEL METER shows about 0dB.  
LINE 1  
3
BALANCE CONTROL  
Adjusts the stereo balance for each PGM channel. Can be used for adjusting the  
unbalanced stereo image caused by a strong anti-skating setting. Clockwise rotation  
from center position increases the volume of R over L channel. A counter  
clockwise rotation increases the volume of L channel over R.  
2
3
MIN  
MAX  
BAL  
4
EQUALIZER(HI,MID,LOW)  
L
EQ  
R
Adjusts the HI, MID, LOW frequencies for each PGM channel. Each band has  
following specifications.  
HI  
HI  
MID  
LOW  
8kHz ±16dB  
500Hz ±12dB  
80Hz ±16dB  
-16dB  
MID  
+16dB  
+12dB  
+16dB  
4
5
EFFECT SWITCH  
This switch enables the signal from each programs to be sent to AUX send jack.  
Different signal routes can be selected this switch to different positions.  
P R E : The signal before the input fader (after the EQ) will be sent to AUX  
output.  
-12dB  
LO  
-16dB  
POST : The signal after the input and cross fader will be sent to AUX  
output.  
OFF : No signal will be sent to AUX output.  
EFFECT  
5
6
PRE  
OFF POST  
6
CUE SWITCH  
CUE  
Used to send the signal from each program to monitor section for headphone  
monitoring.  
OFF  
ON  
SIGNAL  
7
INPUT FADER  
Used to adjust the Input level of each program. Usually set at the 7-8 position. This is  
a detachable fader for the ease of replacement. Replace with the IF-175 when it is worn out.  
LEVEL  
10  
9
8
7
6
5
4
3
2
1
0
8
CROSS FADER  
When the Input level of PGM1 and PGM2 are properly set, PGM1 will be heard with  
the cross fader set to the left side. PGM2 will be heard with the cross fader set to the  
right side. When the cross fader is set in the center, both programs will be heard. This  
is detachable fader for the ease of replacement with "CF-PCV" when it is worn out.  
7
Ins e rt t he   
m ult i-c a ble c onne c t or  
CF-PCV For  
PMC SERIES ( PMC05ProII , PMC06ProA, etc)  
S e t s ide s wit c h t o "P CV" pos it ion.  
P MC CONNECTOR  
S e t s wit c h t o "P MC" pos it ion  
4
 
HOW TO CHANGE THE FADER UNIT  
HOW TO REMOVE THE TOP PANEL  
HOW TO CHANGE THE FADER UNIT  
1
1
Remove each fader knobs and 10 screws which Remove the screws on the fader panel.  
fix the top panel.  
2
Remove the fader unit from position in mixer.  
2
Remove the top panel.  
3
Carefully remove the multi-cable connector from  
Drive r  
fader unit.  
4
Attach multi-cable connector  
Drive r  
to new fader unit.  
5
P os ition the fa de r unit  
ca re fully a nd s e cure  
with screws.  
Top pa ne l  
Ma in pa ne l  
MICROPHONE, SUB INPUT SECTION  
LINE 4 IN  
9
LINE INPUT JACK(LINE4)  
L
R
9
Input connectors for line level equipment such as CD players,tape decks  
,DATs, or MDs etc.  
MIC  
10  
MIC INPUT JACK(MIC1,2)  
10  
Input jacks of mic1, mic2.  
MIC-1  
MIC-1  
MIC-2  
11  
MIC LEVEL  
Adjusts the input level from all of the microphone inputs.  
12  
MIC EQUALIZER(HI,LOW)  
MIN  
MIC-2  
MAX  
MAX  
11  
12  
Adjusts the HI and LOW frequencies for all of the microphone input.  
13  
EFFECT SWITCH  
MIN  
Used when sending signal to the external effect processor connected to the  
effect SEND/RETURN.  
EQ  
HI  
-16dB  
+16dB  
+16dB  
14  
CUE SWITCH  
Used to send the signal from the mic channel to the monitor section for  
headphone monitoring.  
LO  
-16dB  
EFFECT  
13  
14  
OFF  
CUE  
POST  
ON  
OFF  
5
 
MASTER SECTION  
15  
MASTER OUT LEVEL METER  
1 6  
1 5  
The LED level meters indicate the signal level of the line out.  
MASTER  
+8  
CUE  
+8  
+5  
+3  
+1  
0
+5  
+3  
+1  
0
16  
CUE LEVEL METER  
The LED level meters indicate the signal level of PGM input selected by  
CUE SWITCH.  
-1  
-1  
-3  
-3  
17  
EFFECT SEND LEVEL  
-5  
-5  
Used to adjust the output level from EFFECT SEND JACK. The signal is  
selected by the effect switch.  
-7  
-7  
-10  
-15  
POWER  
-10  
-15  
POWER  
18  
EFFECT RETURN LEVEL  
L
R
Used to adjust the input level from the EFFECT RETURN JACK. This  
EFFECT RETURN can be used as the sub line input.  
EFFECT  
SEND  
19  
EFFECT CUE SWITCH  
1 7  
Used to send the signal from EFFECT RETURN JACK to the monitor  
section for headphone monitoring.  
MIN  
RETURN  
MAX  
1 8  
1 9  
20  
MASTER BALANCE VOLUME  
MIN  
MAX  
ON  
CUE  
OFF  
Adjusts the signal balance of left to the right side of the outputs from the  
OUTPUT jack on the rear panel.  
MASTER  
21  
MASTER LEVEL VOLUME  
BAL  
Adjust the signal level output from the output jack on the rear panel.  
2 0  
2 1  
L
R
22  
SPLIT CUE SWITCH  
LEVEL  
When this switch is ON, the master signal is always heard through the  
right earcup of the headphone. The CUE signal will be heard in the left  
earcup when that input is selected by the CUE SWITCH (5, 14). This  
enables both programs to be monitored simultaneously,thus assisting in  
beat mixing.  
MIN  
MAX  
MONITOR  
SPLIT CUE  
ON  
OFF  
2 2  
2 3  
PHONES  
LEVEL  
23  
HEAD PHONE LEVEL  
Adjusts the headphone output level.  
MIN  
MAX  
24  
HEAD PHONE JACK  
PHONES  
IN  
Use this jack to connect the headphones the impedance 8ohm to 600ohm  
can be used, 150ohm is recommended.  
2 4  
ISOLATOR SECTION  
25  
HI SWITCH  
Allows cutting off the sound of treble range. Sound volume will be cut  
when the switch is set downwards. When the switch is put back, the output  
volume returns to normal. Can be useful for cutting off the sound of the  
cymbals or high hats for example.  
PGM1 ISOLATOR  
26  
MID SWITCH  
Allows cutting off the sound of the middle range. Sound volume will be cut  
when the switch is set downward position. When the switch is put back, the  
output volume becomes normal sound volume. Can be used for cutting off  
vocal and melody from the source.  
LO  
MID  
HI  
2 6  
2 5  
2 7  
27  
LOW SWITCH  
Allows cutting off the sound of the bass range. Sound volume will be cut  
when the switch is set downward. When the switch is put back, the output  
volume return to normal. Can be utilized for creating the effects of an  
acapella.  
6
 
REAR PANEL  
3 1  
2 8  
AC100V  
50 / 60Hz 20W  
POWER  
MADE IN CHINA SERIAL NO.  
OUTPUT  
MASTER OUT 1  
EFFECT  
SEND  
PGM  
LINE 6  
2
SUB  
PGM 1  
LINE 2  
ON  
R
L
R
L
R
L
R
L
OFF  
R
LINE 3  
L
LINE 5  
LINE 1  
R
L
MASTER OUT 2  
PHONO 3  
PHONO 2  
GND  
PHONO 1  
GND  
RETURN  
2 9  
3 0  
3 2  
3 3  
3 5  
3 4  
28  
POWER SWITCH  
33  
PHONO INPUT JACK  
The first LED of MASTER OUT LEVEL METER  
that is located on the top panel is lit when on.  
Input jack for PGM1,PGM2 and SUB channel  
turntables.  
29  
AC POWER CABLE  
Connect turntables equipped with the MM pick up  
cartridge only.  
30  
OUTPUT JACK(1/4inch PHONE JACK, RCA  
PIN JACK)  
Connect to the input of power amplifier.  
34  
LINE INPUT JACK  
Input connectors for the line level equipment such as  
CD players, tape decks, DATs, MDs.  
31  
EFFECT SEND JACK  
35  
GROUND TERMINAL  
Connect the SEND jacks to the input of an external  
effector unit(Delay,Reverb etc)  
Connect this terminal to the ground lead of the  
turntable. This helps to reduce noise and hum.  
32  
EFFECT RETURN JACK  
Connect the RETURN jacks to the output of the  
effector.  
SPECIFICATIONS  
NOMINAL INPUT LEVELIMPEDANCE  
FREQUENCY RESPONSE 20Hz20kHz (0,-3dB)  
S/N RATIO  
DIMENSION (  
WEIGHT  
80dB  
PHONO  
LINE  
42dB470k  
10dB47k  
42dB3.3k  
10dB47k  
)
290mm X94mm X 380mm  
5kg  
WXHXD  
MIC  
EFFECT RCV  
RATED OUTPUT LEVELIMPEDANCE  
LINE OUT  
4dB10KΩ  
10dB10kΩ  
10dB10kΩ  
REC OUT  
EFFECT SEND  
May.2001 PCV-275 E2  
Vestax Corporation  
 

Texas Instruments Computer Hardware TPS650231EVM User Manual
Toastmaster Oven XO 1MTD User Manual
Toro Sprinkler 53763 User Manual
Toshiba DVD Player HD XE1KY User Manual
Toshiba Security Camera IKWR05A User Manual
Tripp Lite Surge Protector Data Shield User Manual
Vax Carpet Cleaner VO27 User Manual
Velodyne Acoustics Speaker Digital Drive Subwoofer User Manual
Wayne Dalton Garage Door Opener 341458 User Manual
Weed Eater Lawn Mower 532 43 32 03 User Manual