Toshiba DVD Player SD 150ESB User Manual

TABLE OF CONTENTS  
ABOUT THIS MANUAL ................................................................... 2  
SAFETY INFORMATION................................................................. 2  
WARNING ........................................................................................ 2  
SAFETY PRECAUTIONS ............................................................... 3  
SAFETY PRECAUTIONS ............................................................... 4  
NOTES ON CD-R AND CD-RW DISCS ........................................... 5  
NOTES ON DISCS .......................................................................... 5  
SUPPLIED ACCESSORIES ............................................................ 6  
DISC TYPES COMPATIBLE WITH THIS UNIT ............................. 7  
GENERAL PROPERTIES ............................................................... 8  
FRONT PANEL FUNCTIONS .......................................................... 9  
FRONT PANEL DISPLAY ............................................................. 10  
REAR PANEL PARTS.................................................................... 11  
CONNECTION OF YOUR DVD PLAYER WITH TV .................... 12  
CONNECTION OF YOUR DVD PLAYER WITH AV AMPLIFIER 13  
FITTING BATTERIES IN YOUR REMOTE CONTROL .............. 14  
REMOTE CONTROL FUNCTIONS ............................................. 14  
DVD PLAYBACK ........................................................................... 16  
DIRECT SELECTION OF SCENES ............................................. 17  
REPEAT PLAY.............................................................................. 18  
CONVENIENT FUNCTIONS......................................................... 18  
VIDEO CD PLAYBACK ................................................................. 20  
DIRECT SELECTION OF SCENES ............................................. 21  
REPEAT PLAY.............................................................................. 22  
CONVENIENT FUNCTIONS......................................................... 22  
AUDIO CD PLAYBACK ................................................................. 23  
DIRECT SELECTION OF TRACKS ............................................. 24  
REPEAT PLAY.............................................................................. 24  
CONVENIENT FUNCTIONS......................................................... 24  
CD MENU ...................................................................................... 25  
SMARTNAVI ................................................................................. 27  
USING SETUP MENU .................................................................. 29  
MENU ITEMS ............................................................................... 29  
TROUBLESHOOTING ................................................................. 32  
SPECIFICATIONS ........................................................................ 33  
DEFINITION OF TERMS.............................................................. 34  
- 1 -  
EN  
 
SAFETY PRECAUTIONS  
Power Source  
The unit should be operated only from a 220-240V~ 50 Hz outlet. Please do not open the cover by yourself. There is high  
voltage in the set, which will endanger your life. Please contact local service agent for help and advice. Repairs to be  
carried out by a qualified technician only.  
The apparatus is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even  
if the apparatus itself has been turned off.  
If you are not going to use the apparatus for a long time, be sure to disconnect the apparatus from the wall outlet.  
Power Cord  
Do not place the unit, a piece of furniture, or any object on the power cord (mains lead). Do not cut or pinch the power  
cord. Handle the power cord by the plug. Do not pull out the plug by tugging the cord and never touch the power cord  
when your hands are wet as this could cause a short circuit or electric shock. Never make a knot in the cord or tie it with  
other cords. The power cords should be routed in such a way that they are not likely to be stepped on. A damaged power  
cord can cause fire or give you an electrical shock. Check the power cord once in a while. If you find it damaged, ask  
closest service agent for help. When the AC power cord needs to be changed, it should be done at a qualified service  
shop only.  
SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT  
This equipment has been designed and manufactured to meet international safety standards but, like any electrical  
equipment, care must be taken if you are to obtain the best results and safety is to be assured. So, please read the points  
below for your own safety. They are of a general nature, intended to help you with all your electronic consumer products  
and some points may not apply to the goods you have just purchased.  
DO read the operating instructions before you attempt to use the equipment.  
DO ensure that all electrical connections (including the mains plug, extension leads and inter- connections between the  
pieces of equipment) are properly made and in accordance with the manufacturer’s instructions. Switch off and withdraw  
the mains plug before making or changing connections.  
DO consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.  
DO be careful with glass panels or doors on equipment  
DON’T remove any fixed cover as this may expose dangerous voltages.  
DON’T obstruct the ventilation openings of the equipment with items such as newspapers, tablecloths, curtains, etc.  
Overheating will cause damage and shorten the life of the equipment.  
DON’T allow electrical equipment to be exposed to dripping or splashing, or objects filled with liquids, such as vases, to  
be placed on the equipment.  
DON’T place hot objects or naked flame sources such as lighted candles or nightlights on, or close to equipment. High  
temperatures can melt plastic and lead to fires.  
DON’T use makeshift stands and NEVER fix legs with wood screws - to ensure complete safety always fit the  
manufacturer’s approved stand or legs with the fixings provided according to the instructions.  
DON’T use equipment such as personal stereos or radios so that you are distracted from the requirements of traffic safety.  
It is illegal to watch television whilst driving.  
DON’T listen to headphones at high volume, as such use can permanently damage your hearing.  
DON’T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended  
operation or has a stand-by mode. Switch off using the switch on the equipment and make sure that your family know  
how to do this. Special arrangements may need to be made for infirm or handicapped people.  
DON’T continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any way  
-switch off, withdraw the mains plug and consult your dealer.  
ABOVE ALL  
NEVER let anyone especially children push anything into holes, slots or any other opening in the case - this could result  
in a fatal electrical shock;  
NEVER guess or take chances with electrical equipment of any kind  
— it is better to be safe than sorry!  
- 3 -  
EN  
 
SAFETY PRECAUTIONS  
Notes on copyrights:  
It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyright material without  
permission.  
This product is equipped with copy protection measures developed by Macrovision. Copy protection signals are recorded  
on some discs. When recording these discs on a VCR, picture noise will appear during playback.  
This product incorporates copyright protection technology that is protected by certain U.S. patent claims and other  
intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection  
technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only  
unless otherwise authorized by Macrovision Corporation . Reverse engineering or disassembly is prohibited.  
The following information applies only to the model for U.K.  
WIRING : This unit is supplied with a BSI 1363 approved 13 amp mains plug, fused at 5 amp. When replacing the fuse  
always use a 5 amp BS 1362, BSI or ASTA approved type. Never use this plug with the fuse cover omitted. To obtain a  
replacement fuse cover contact your dealer. If the type of plug supplied is not suitable for the mains sockets in your home,  
then the plug should be removed and a suitable type fitted.Please refer to the wiring instructions below:  
WARNING: Amains plug removed from the mains lead of this DVD player must be destroyed.Amains plug with bared wires  
is hazardous if inserted in a mains socket.  
Do not connect either wire to the earth pin, marked with the letter E or with the earth symbol  
and yellow.  
or coloured green or green  
If any any other plug is fitted, use a 5 amp fuse, either in the plug, or at the distribution board.  
IMPORTANT: The wires in this mains lead are coloured in accordance with the following codes:  
- BLUE: NEUTRAL , BROWN: LIVE - As the colours of the wires in the mains lead of this DVD player may not correspond  
with the coloured marking identifying the terminals in your plug, proceed as follows: The wire which is coloured blue must  
be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must  
be connected to the terminal which is marked with the letter L or coloured red.  
- 4 -  
EN  
 
NOTES ON CD-R AND CD-RW DISCS  
CD-R (Recordable) and CD-RW (Rewritable) discs, recorded by the users, may only be used after finalization process.  
CD-R and CD-RW discs may not be usable, depending on the disc features, recording conditions and damage or dirt  
on disc. The disc configuration and features are determined by the tool and device used for recording. Therefore, users  
may face with the following undesired consequences:  
Some discs may not be read at all.  
Some discs may cause system crash after playing for a while.  
Some parts of the disc may be skipped or worked abnormally.  
Compare with the original discs, the time passed for reading a CD-R and CD-RW discs may be longer.  
NOTES ON DISCS  
On handling discs  
To keep the disc clean, handle the disc by its edge. Do not touch the surface.  
Do not stick paper or tape on the disc.  
If the disc is contaminated with any substance like glue remove before using it.  
Do not expose the disc to direct sunlight or heat sources such as hot air ducts, or leave it in a car parked in direct sunlight  
as the temperature can rise quickly and damage the disc.  
After playing, store the disc in its case.  
On cleaning  
Before playing, clean the disc with a cleaning cloth. Wipe the disc from the center out.  
Do not use solvents such as benzene, thinner, commercially available cleaners or anti-static spray intended for vinyl  
LPs.  
Discs that should not be used  
Only the discs including the marks shown on page 7 can be played.  
Note, however, that discs with special shapes (heart-shaped discs, hexagonal discs, etc.) cannot be played. Do not  
attempt to play such discs, as they may damage the player.  
¥
NOTE:  
Do not use record spray or antistatic. Also do not use volatile chemicals such as benzene or thinner.  
- 5 -  
EN  
 
SUPPLIED ACCESSORIES  
In the packaging material you will find the following:  
D
E
F
(a) Remote control  
(b) Two R03 (AAA) batteries for remote control.  
(c) Owner’s Manual  
- 6 -  
EN  
 
DISC TYPES COMPATIBLE WITH THIS UNIT  
This player can play the following discs.  
'LVFꢄ7\SHV  
ꢆ/RJRVꢉ  
5HFRUGLQJ 'LVFꢄ6L]H  
7\SHV  
0D[ꢇ  
3OD\LQJ  
7LPH  
&KDUDFWHULVWLFV  
'9'  
‡ꢄ  
‡ꢄ  
ꢂꢃꢄFP  
$XGLR  
9LGHR  
ꢅꢄFP  
9,'(2ꢀ&'  
$8',2ꢀ&'  
03ꢈꢀ&'  
ꢂꢃꢄFP  
ꢊꢋꢄPLQꢇ  
ꢃꢌꢄPLQꢇ  
$XGLR  
9LGHR  
‡ꢄ  
‡ꢄ  
ꢅꢄFP  
ꢂꢃꢄFP  
$XGLR  
ꢊꢋꢄPLQꢇ  
ꢃꢌꢄPLQꢇ  
ꢅꢄFP  
ꢂꢃꢄFP  
$XGLR  
‡ꢄ  
ꢆ[[[[ꢇPSꢈꢉ  
ꢅꢄFP  
3,&785(ꢀ&'  
ꢂꢃꢄFP  
9LGHR  
‡ꢄ  
‡ꢄ  
ꢆVWLOOꢄSLFWXUHꢉ  
-3(*  
ꢅꢄFP  
'LY;  
ꢂꢃꢄFP  
$XGLR  
9LGHR  
ꢅꢄFP  
- 7 -  
EN  
 
GENERAL PROPERTIES  
1) DVD/VCD/CD/CD-R/CD-RW/MP3/JPEG/MPEG/DivX playback  
2) NTSC/PAL playback (according to disc content)  
3) User-friendly multilanguage OSD menu control  
4) Vacuum Fluorescent Display (VFD)  
5) Dolby Digital, DTS, LPCM audio via coaxial connection  
6) Multiple Aspect Ratio support (16:9 Widescreen, 4:3 Letterbox, 4:3 PAN & SCAN)  
7) Multi-Audio (up to 8) support  
8) Multi-Subtitle (up to 32) support  
9) Multi-Angle (up to 9) support  
10) 8 parental levels  
11) Fast forward and rewind at different speeds.  
12) Smooth and seamless playback at 2x speed.  
13) Slow motion playback in different speeds.  
14) Frame by frame forward playback  
15) Time Search  
16) Repeat  
17) A - B repeat  
18) Different play modes for Audio CD, MP3, JPEG and MPEG (Normal/Shuffle/Intro)  
19) Program function for Audio CD, MP3 and JPEG  
20) Scart Socket  
21) Analog Audio Output  
- 8 -  
EN  
 
FRONT PANEL FUNCTIONS  
ꢇ ꢆ  
1. Disc Tray  
Place a disc on the tray.  
2. Front Panel Display (VFD)  
Indicates the playing time, title, chapter/track, etc.  
3. OPEN/CLOSE ( ) button  
Opens or closes the disc tray.  
4. STOP button  
Stops playing disc.  
5. PLAY/PAUSE button  
Plays/pauses the disc. For any DVD title that has a root menu with still picture, this button functions as “button select”  
(selects highlighted item) in the root menu. Otherwise this functioning of “play/pause” button on the root menu will be  
prohibited by the disc, and  
will appear.  
´
6. SKIP buttons  
Press to go back to the preceding chapter/track or go to the next chapter/track.  
7. ON/SATND BY Indicator  
8. ON/STANDBY button  
Turns the unit on or switches the unit to standby mode.  
- 9 -  
EN  
 
FRONT PANEL DISPLAY  
1. Play/Pause  
2. Current Disc  
3. Time or Title / Chapter / Track number  
4. Dolby Digital / DTS  
5. Zoom  
6. Title Number  
7. Angle  
8. Chapter / Track Number  
9. Repeat  
- 10 -  
EN  
 
REAR PANEL PARTS  
1. DIGITAL AUDIO OUT connector  
COAXIAL :  
Connects to an audio component using the coaxial digital connection cord.  
2. AUDIO connectors  
Connects to the AV amplifier or audio input connector on the TV by using 2 cords (Left, Right).  
3. VIDEO OUT connector  
VIDEO :  
Connects to the video input connector on the TV.  
4. SCART connector  
Connects to the scart-input connector on the TV.  
- 11 -  
EN  
 
CONNECTION OF YOUR DVD PLAYER WITH TV  
Be sure to turn off the power of each component before making the connections.  
Scart socket:  
RGB signal via scart cable gives you the best picture performance. If your DVD player will not be connected to a hi-fi set  
or A/V amplifier to hear better sound, scart is enough for both audio & video connections.  
79  
Video & Audio Output RCA Jacks:  
Video (yellow) & audio (Red: right, White: left) output jacks can be used to connect the DVD player to your TV set via  
cables. To make this connection, your TV set must have Video & audio input connectors. This type of connection is  
alternative to scart connection. Picture quality is not as good as SCART RGB connection but audio performance is the  
same.  
- 12 -  
EN  
 
CONNECTION OF YOUR DVD PLAYER WITH AV AMPLIFIER  
®
Be sure to turn off the power of each component before making the connections.  
Analog Audio Output Jacks:  
To get better sound quality, the unit can be connected to an amplifier via analog audio left/right outputs.  
Digital Audio Output Connectors:  
For the best sound, the unit can be from the coaxial digital audio output to an AV amplifier with a built-in Dolby Digital or  
DTS decoder. By using 6 speakers, user can enjoy the 5.1 channel surrounding sound.  
¥
NOTE:  
When this unit is connected to a separate Decoder Box or Amplifier through the DIGITAL AUDIO OUT connector, you  
may sometimes hear a short noise when selecting the sound system in the DVD Menu. This is not a malfunction.  
- 13 -  
EN  
 
FITTING BATTERIES IN YOUR REMOTE CONTROL  
First open the battery cover on the underside of the remote control. Fit both batteries 1.5Volt (R03/AAA) referring to the  
imprinted symbols (+/-) in the battery case and put on the battery cover again.  
While using the remote control, direct it towards the front of the DVD player. If the remote control does not work or the  
chosen function could not be made, the batteries are most probably exhausted and they should be replaced as soon as  
possible. Please use only leak proof batteries. If you will not be using your remote control for a long time, it is recommended  
to take out the batteries from your remote control.  
REMOTE CONTROL FUNCTIONS  
- 14 -  
EN  
 
1. TIME button  
16. AUDIO button  
Changes the playing time display mode of the disc, title,  
track, on the OSD and front panel display.  
Changes the language of the sound while playing a DVD.  
17. SUBTITLE button  
2. OPEN/CLOSE ( ) button  
Changes the language of the subtitle while playing a DVD.  
18. ANGLE button  
Opens or closes the disc tray.  
3. Number buttons  
Changes the angle when playing a DVD disc recorded with  
multiple angles.  
Press to enter track/chapter/title/time numbers directly.  
4. SEARCH MODE button  
19. A - B RPT button  
Press to select the unit for search (title, chapter, track,  
time)  
Press to execute the A - B repeat play.  
20. +10 button  
5.TOP MENU button  
For the track numbers which are greater than “9” use +10  
button. Each press increases the number by 10.Then type the  
second digit of track number..  
Displays the title menu on the TV screen or activates the  
digest menu in Picture CD(JPEG).  
6. MENU button  
21. PLAY MODE button  
Displays the DVD root menu on screen. During VCD  
playback, shows the VCD menu if it exists. Press again  
to resume playback.  
Press to execute disc/title/chapter repeat.  
22. RETURN button  
Returns to the preceding selection screen.  
23. PROGRAM button  
7. SLOW BUTTONS  
Use these buttons for forward and reverse slow  
playback  
Press to enter the program menu in stop mode for audio CD,  
MP3 CD and JPEG CD.  
8. PLAY/PAUSE button  
24. ZOOM button  
Plays/pauses the disc. For any DVD title that has a root  
menu with still picture, this button functions as “button  
select” (selects highlighted item) in the root menu.  
Otherwise this functioning of “Play/Pause” button on the  
Zooms the picture.  
25. SKIP/STEP : button  
root menu will be prohibited by the disc, and  
appear.  
will  
´
Press to go to the next chapter or track during playback and  
next frame during pause.  
9. SEARCH/REV-FWD  
26. CLEAR button  
Press to adjust the forward and reverse playback at  
different speeds during playback (fast forward/reverse)  
or during pause mode (slow motion).  
Using this button you can delete the mistyped entries or you  
can cancel some functions.  
10. SKIP 9button  
Press once midway through a chapter or track to go back  
to the beginning of the current chapter or track during  
playback. When pressed twice in quick succession,  
playback will start from the preceding chapter or track.  
11. STOP button  
Stops playing disc.  
12. SETUP/DISP  
Displays the current playing status or set-up menu on the  
TV screen.  
13. Arrow buttons  
Move to the items or settings.  
14. ENTER button  
Executes the items or settings.  
15. ON/STANDBY button  
Turns the unit on or switches the unit to standby mode  
- 15 -  
EN  
 
DVD PLAYBACK  
Preparations  
Turn on your audio system if the player has been connected to an audio system and turn on your TV.  
Basic Play  
1. Press on the ON/STANDBY button  
2. Press OPEN/CLOSE ( ) to open the disc tray.  
3. Place a disc onto the tray  
Hold the disc without touching either of its surfaces, position it with the printed title side facing up, align it with the guides,  
and place it in its proper position.  
4. Press OPEN/CLOSE ( ) .  
The disc tray closes and play commences if the disc does not have any menus recorded on it.  
A menu may appear on the TV screen after a few moments or the film may start immediately after the introduction of the  
Film Company. This behaviour depends on the disc content and may change.  
¥
NOTE:  
Step 5 and 6 are available only when a menu is recorded on the disc.  
5. Press 3/4/6/5 or the number button(s) to select the preferred title.  
6. Press ENTER.  
Playback of the selected item now starts.The played item may be a motion picture, a still picture or another submenu  
depending on the disc.  
¥
NOTE:  
When using menus, the disc controls the behaviour of the player.  
For stopping play and returning to the menu screen (when a menu is available on the disc), press MENU or TOP MENU  
button depending on the disc. Play is suspended, and the Disc menu screen is displayed.  
After operation  
When the unit is not in use, remove the disc and press ON/STANDBY to turn off the unit.  
¥
NOTE:  
The disc continues to rotate while the menu is displayed even after the player has finished playing a particular item. When  
no further selections are to be played, be sure to press the STOP (<) button to clear the menu display.  
If the disc is placed in upside down ( and it is a single sided disc), the VFD display on the player will indicate bAd dI.  
For your reference:  
If an action corresponding to a button is prohibited, the  
symbol appears.  
´
Bookmark  
During playback of DVD, VCD (with PBC off, see page 20) or CD DA you can mark three positions and start playback  
from those positions later.  
Saving the position  
1. Press PROGRAM button during playback of a DVD, VCD or CDDA.  
2. Bookmark screen is displayed.  
3. Select the bookmark in which you want to save the current position by using the arrow keys.  
4. Press ENTER to save the current playback position.  
The time is saved to the bookmark selected and is displayed in the list.  
- 16 -  
EN  
 
Playback of bookmarks  
Step Forward  
1. Press PROGRAM button to open the bookmark screen.  
2. Bookmark screen is displayed.  
3. Highlight one of the bookmarks that you saved before.  
4. Press ENTER.  
Press PLAY/PAUSE once during playback.  
Press SKIP/ STEP :.  
The next frame of the movie is displayed.  
¥
NOTE:  
The playback will resume from that position.  
Clearing bookmarks  
Reverse stepping is not available.  
Slow motion Play Forward / Backward  
1. Press PROGRAM button to open the bookmark screen.  
2. Bookmark screen is displayed.  
3. Select the bookmark you want to clear.  
4. Press CLEAR  
Press PLAY/PAUSE once during playback.  
Press SLOW (  
Slow Backward or Slow Forward  
)
to increase or decrease the speed of the slow motion play.  
The speed of slow motion play is displayed on the screen  
each time you change it.  
The content of the bookmark is cleared.  
To close bookmark screen press PROGRAM again.  
NOTE:  
To return to normal play:  
Press PLAY/PAUSE.  
Bookmarks are cleared when you eject the disc or when  
you turn off your player.  
Direct Selection of Scenes  
Stopping Play  
Selecting Scenes by Chapter Number  
To stop the play permanently, press STOP (<) twice.  
When the STOP (<) button is pressed for the first time, a  
message “PRESS PLAY KEY TO CONTINUE” will appear  
on the screen to remind you if you want to continue the  
play. To stop the play press the STOP (<) button again or  
you can press PLAY/ PAUSE to continue playback.  
Press SEARCH on the remote control once during  
playback.  
The chapter/title search box is displayed on the screen. You  
can see the total number of chapters as -/xx.  
Enter the number of the chapter using number buttons.  
The selected chapter is played just after you enter all the  
chapter number digits or when you press ENTER after  
entering some digits.  
Fast Forward / Reverse  
Press FWD 8 or REV 7 on the remote control during  
playback.  
The speed of forward or reverse changes for every  
press of the FWD 8 or REV 7button.  
You can clear the field by pressing the CLEAR button if you  
enter wrong number.  
Normal play is resumed when the PLAY/PAUSE button is  
pressed.  
You can press RETURN key to cancel chapter search.  
¥
NOTE:  
If you attempt to enter a number greater than the total  
number of chapters on the current title, it clears the  
numbers entered and waits for you to enter again.  
Skip Forward / Backward  
Press SKIP 9or SKIP/STEP :.  
If you wait ten seconds without pressing any key for  
selecting scenes by chapter number operation is  
cancelled.  
A chapter is skipped forward or backward each time the  
button is pressed.  
When the SKIP 9 is pressed once midway through a  
chapter, play returns to the start of that chapter. When it is  
pressed again in quick succession, a previous chapter is  
skipped each time the button is pressed.  
Selecting Scenes by Title Number  
Press SEARCH on the remote control once during  
playback.  
Pause  
The chapter/title search box is displayed on the screen.  
Press PLAY/PAUSE once during playback.  
The picture will go to pause mode.  
To return to normal play:  
Press 3(Left) button on the remote control to select the  
title field in the search box to change the title.  
You can see the currently playing title and total number of  
titles as -/xx.  
Press PLAY/PAUSE again.  
- 17 -  
EN  
 
Enter the number of the title using number buttons.  
¥
NOTE:  
The selected title is played just after you enter all the title  
number digits or when you press ENTER after entering  
some digits.  
Repeat play may be prohibited by some DVD titles.  
Repeating sections between two specific points.  
(A – B repeat)  
You can clear the field by pressing the CLEAR button if you  
enter wrong number.  
You can press RETURN key to cancel title search.  
Press A-B RPT during playback at the point where repeat  
play is to commence (A).  
¥
NOTE:  
“ A TO B SET A ” is displayed.  
If you attempt to enter a number greater than the total  
number of titles, it clears the numbers entered and waits  
for you to enter again.  
Press A-B RPT again at the point where repeat play is to  
be concluded (B).  
If you wait ten seconds without pressing any key for  
selecting scenes by title number, the operation is cancelled.  
“ A TO B SET B ” is displayed and the repeat play of the  
selection between points A and B starts, if not prohibited  
by the DVD.  
Selecting Scenes by Time  
To return to normal play:  
PressA-B RPT again. “ATO B CANCELLED ” is displayed  
and the A-B Repeat is disabled.  
You can view the DVD starting from any time point you  
want.  
Press SEARCH on the remote control “ twice “ during  
playback.  
Convenient Functions  
The time search box is displayed on the screen. You can  
see the total runtime of the title as --:--:--/xx:xx:xx  
Displaying the time information  
Enter the time using number buttons.  
The title is played beginning from the desired time just after  
you enter the time, if not prohibited by the DVD.  
Press SETUP/DISP during playback.  
During playback, when this button is pressed, some  
information is displayed on TV screen to indicate the current  
status of the disc. In the display screen you can find the  
following information lines:  
You can clear the fields by pressing the CLEAR button if  
you enter wrong numbers.  
You can press RETURN key to cancel time search.  
Line 1: Title & Chapter Numbers  
¥
NOTE:  
Line 2:Audio Format, Number of Output Channels &Audio  
Language  
If you attempt to enter a number greater than the total time  
of the current title, it clears the numbers entered and waits  
for you to enter again.  
Line 3: Subtitle Language Number & Subtitle Language  
If you wait ten seconds without pressing any key for  
entering time, selecting scenes by time operation is  
cancelled.  
Line 4: Time Counter Mode & Time Counter  
Pressing SETUP/DISP button once more closes this  
information screen.  
You can also reach time information screen by pressing  
TIME key.  
Repeat Play  
Time counter modes can be selected by pressing TIME key  
consecutively.  
Repeat Viewing  
Press PLAYMODE during playback.  
First hit to TIME key: TITLE ELAPSED Mode  
Second hit to TIME key: TITLE REMAIN Mode  
Third hit to TIME key: CHAPTER ELAPSED Mode  
Fourth hit to TIME key: CHAPTER REMAIN Mode  
Each time this button is pressed, a different repeat box is  
displayed on the screen.  
If “CHAPTER REPEAT ” is displayed, the current chapter  
will be played again.  
If “TITLE REPEAT ” is displayed, the current title will be  
played again.  
If “TITLE ELAPSED” is displayed, the elapsed time for the  
title is being displayed on the VFD display.  
If “REPEAT OFF” is displayed, the repeat mode is  
disabled.  
If “TITLE REMAIN” is displayed the remaining time for the  
title is being displayed on the VFD display.  
- 18 -  
EN  
 
If “CHAPTER ELAPSED” is displayed, the elapsed time for  
the chapter is being displayed on the VFD display.  
¥
NOTE:  
When the preferred language is not selected even after  
pressing the button several times, it means that the  
language is not available on the disc.  
If “CHAPTER REMAIN” is displayed, the remaining time  
for the chapter is being displayed on the VFD display.  
When the standby is turned on or the disc is removed, the  
language heard is the one selected at the initial settings. If  
this language is not recorded on the disc, only the available  
language on the disc will be heard.  
Displaying a scene with a larger and closer view  
ZOOM function enables you to take a closer look at the  
scene you are viewing. This is especially useful when you  
are watching science fiction or an adventure film.  
Viewing From Another Angle  
Some DVD discs may contain scenes, which have been  
shot simultaneously from a number of different angles. For  
these discs, the same scenes can be viewed from each  
of these different angles using the ANGLE button.  
¥NOTE: Pressing ZOOM key consecutively will change  
the zoom ratios. You can move in the picture i.e change the  
zoomed location by using the 3/4/6/5arrow keys.  
To return to normal play:  
The number of recorded angles differs depending on the  
disc used.  
Press ZOOM again. “ZOOM OFF” is displayed on the screen  
and the picture is now in its normal size.  
(“  
y/x ”) is displayed briefly on the screen during  
playback. This indicates that the multi-angle scene has just  
started. Also on unit’s display (VFD) ‘ANGLE’ message  
appears. From that moment on, the yth angle of total x  
angles is played and you can change the viewing angle  
until the end of the multi-angle scene.  
Displaying / Changing Subtitle Language  
It is possible to change the subtitle language from the one  
selected at the initial settings to a different language, if  
available.  
In SETUP menu, an ‘ANGLE MARK’ option exists, which,  
if enabled, will display a continuous angle mark on the  
screen as long as multi-angle scene is available.  
(This operation works only with discs on which multiple  
subtitle languages are recorded, if not prohibited by the  
disc.)  
Press ANGLE during playback.  
The current angle is changed  
Press SUBTITLE during playback.  
When no subtitles are recorded  
instead of the selected language.  
will be displayed  
PressANGLE a number of times until the preferred viewing  
angle is selected.  
´
Press SUBTITLE a number of times until the preferred  
language is selected.  
¥
NOTE:  
This function will only work on discs where different  
angles have been recorded.  
When this button is pressed once, the first subtitle  
recorded on the disc will be displayed. The subtitles  
recorded will be displayed in sequence for every press  
of the SUBTITLE button cyclically.  
The viewing angles are shown on the screen. You can  
select one from them for viewing.  
If you press ANGLE outside of a multi-angle scene on a  
To turn off the subtitles, press subtitle a number of times  
until “SUBTITLE OFF ” appears on the screen.  
multi-angle title,  
angle is currently available.  
is displayed. It means that only one  
´
¥
NOTE:  
Using a DVD Menu  
When the preferred language is not selected even after  
pressing the button several times, it means that the  
language is not available on the disc.  
Some DVD discs have unique menu structures called DVD  
menus. For example, DVDs programmed with complex  
content provide guide menus, and those recorded with  
various languages provide menus for audio and subtitle  
language. Although the DVD menus’ content and operation  
differ from disc to disc, the following explains basic  
operation when this feature is used.  
When the player is restarted or the disc is changed, the  
subtitle selection is automatically changed back to the initial  
settings.  
Press TOP MENU or MENU during playback.  
Changing Audio Soundtrack Language  
The DVD menu available on the disc is now displayed.  
It is possible to change the audio language from the one  
selected at the initial settings to a different language, if  
available.  
¥
NOTE:  
If you press MENU, the root menu of DVD is displayed.  
(This operation works only with discs on which multiple  
audio soundtrack languages are recorded, if not prohibited  
by the DVD.)  
If you press TOP MENU, the menu of the current title is  
displayed.  
Press 3/4/6/5to select the preferred item.  
Press AUDIO during playback.  
Press AUDIO a number of times until the preferred  
language is selected.  
- 19 -  
EN  
 
Press ENTER  
VIDEO CD PLAYBACK  
The selected item is now executed.  
You can play any track you want, just by pressing the  
corresponding number button.  
Preparations  
Press on the standby button of your audio system if the  
player has been connected to an audio system.  
For the track numbers which are greater than “9” use +10  
button. Each press increases the number by 10.Then type  
the second digit of track number.  
If you attempt to enter a number greater than the total  
Basic Play  
number of tracks on disc,  
screen.  
symbol is displayed on  
´
1. Press on the standby button  
2. Press OPEN/CLOSE ( ) to open the disc tray.  
3. Place a disc onto the tray  
¥
NOTE:  
Some DVDs may not contain root and/or title menus.  
Hold the disc without touching either of its surfaces, position  
it with the printed title side facing up, align it with the guides,  
and place it in its proper position.  
4. Press OPEN/CLOSE ( ) .  
The disc tray is closed.  
For Video CDs without playback control:  
Play commences immediately.  
For Video CDs provided with playback control:  
If disc contains a menu, it will appear on the screen after  
a few moments.  
Bookmark  
Please see page 16 for bookmark operation.  
Menu Play  
This function works only with video CDs with playback  
control (version 2.0)  
The details differ depending on the disc concerned. Also  
refer to the instructions accompanying the disc.  
After steps 1 to 4 above the menus are displayed on the  
TV screen  
5. Press the number button(s) to select the preferred item.  
The player now starts to play the selected item.  
¥
NOTE:  
Use +10 button to enter two-digit-numbers.  
3/4/6/5 arrow buttons are not used for selecting  
items for video CDs.  
What is playback control (PBC)?  
If a video CD has “playback control “ written on the jacket  
of disc, it means that particular scenes or information can  
be selected for viewing interactively with TV screen using  
the menu screen.  
¥
NOTE:  
TOP MENU button is dedicated to PBC “ playback control”  
during VCD playback. You can change PBC mode to ON or  
OFF using this button.  
- 20 -  
EN  
 
When switching from PBC off to PBC on mode, playback  
will start from the beginning of the disc.  
Step Forward  
Press PLAY/PAUSE once during playback.  
The screen suspends.  
PBC on is default. Whenever you insert a disc, it will be  
on  
After operation  
Press SKIP/ STEP :.  
When the unit is not in use, remove the disc and press  
ON/STANDBY to turn off the unit.  
The next frame of the movie is displayed.  
¥
NOTE:  
¥
NOTE:  
Reverse stepping is not available.  
The disc continues to rotate while the menu is displayed  
even after the player has finished playing a particular item.  
When no further selections are to be played, be sure to  
press the STOP (<) button to clear the menu display.  
Slow motion Play Forward / Backward  
Press PLAY/PAUSE once during playback.  
The screen suspends.  
If the disc is placed in upside down ( and it is a single sided  
disc), the VFD display on the player will indicate BAD DISC.  
Press SLOW (Slow Backward  
or Slow Forward ) to  
increase or decrease the speed of the slow motion play.  
For your reference:  
The speed of slow motion play is displayed on the screen  
each time you change it.  
When  
symbol appears while a button is pressed on up-  
´
left corner of OSD (On - Screen - Display), it means that the  
player ,or the disc prohibits the corresponding operation.  
To return normal play:  
Press PLAY/PAUSE.  
Stopping Play  
To stop the play permanently, press STOP (<) twice.  
When the STOP (<) button is pressed for the first time, a  
message “PRESS PLAY KEYTO CONTINUE” will appear  
on the screen to remind you if you want to continue the  
play. To stop the play press the STOP (<) button again or  
you can press PLAY/ PAUSE to continue playback.  
Direct Selection of Scenes  
Selecting Scenes by Time (only for version 2.0  
VCDs)  
You can view the video CD, starting from any time point you  
want.  
Fast Forward / Reverse  
Press REV 7or FWD 8during playback.  
Press SEARCH on the remote control once during  
playback.  
Normal play is resumed when the PLAY/PAUSE button is  
pressed.  
The time search box is displayed on the screen as TRACK  
TIME _ _ : _ _ : _ _ / xx : xx : xx  
The speed of advance or reverse changes for every  
press of the FWD or REV button.  
Enter the time using number buttons.  
Player goes to entered time of the current track.  
Skip Forward / Backward  
Press SEARCH on the remote control two times during  
playback.  
Press SKIP 9or SKIP/STEP:during playback.  
The time search box is displayed on the screen as DISC  
TIME _ _ : _ _ : _ _ / xx : xx : xx  
A track is skipped forward or backward each time the  
button is pressed.  
Enter the time using number buttons.  
Player goes to entered time of the disc.  
When the SKIP button is pressed once midway through a  
track , play returns to the start of that track. When it is  
pressed again in quick succession, a previous track is  
skipped each time the button is pressed.  
If you give up entering the time simply press RETURN, and  
the operation is cancelled.  
Pause  
Press PLAY/PAUSE once during playback.  
The screen suspends.  
¥
NOTE:  
PBC will be turned off automatically when disc search is  
activated.  
To return to normal play:  
Press PLAY/PAUSE again.  
Disc search is available only when PBC is off. (See Page  
20).  
- 21 -  
EN  
 
If you attempt to enter a number greater than the total time  
of the disc or current title, it clears the numbers entered  
and waits for you to enter again.  
Convenient Functions  
If you wait ten seconds without pressing any key for  
selecting scenes, the operation is cancelled.  
Displaying the time information  
Press TIME during playback.  
Accessing tracks using number buttons:  
Each time this button is pressed, a different time information  
box is displayed on the screen.  
You can play any track you want, just by pressing the  
corresponding number button.  
If “SINGLE ELAPSED” is displayed, the VFD display on the  
unit shows the elapsed time for the track which is being  
played  
For the track numbers which are greater than “9” use +10  
button. Each press increases the number by 10.Then type  
the second digit of track number.  
If “SINGLE REMAIN” is displayed, the VFD display on the  
unit shows the remaining time for the track which is being  
played  
If you attempt to enter a number greater than the total  
number of tracks on disc,  
corner of screen.  
symbol appears on up-left  
´
If “TOTAL ELAPSED” is displayed, the VFD display on the  
unit shows the elapsed time for the disc which is being  
played  
¥
NOTE:  
• This operation is available only when PBC is off.(See  
Page 20).  
If “TOTAL REMAIN” is displayed, the VFD display on the  
unit shows the remaining time for the disc which is being  
played  
Repeat Play  
Displaying a scene with a larger and closer view  
Press PLAY MODE during playback.  
This zoom in function enables you to take a closer look at  
the scene you are viewing.  
Each time this button is pressed, a different repeat box is  
displayed on the screen.  
This is especially a useful function when you are watching  
science fiction or an adventure film.  
If “REPEAT TRACK” is displayed, the current track will be  
played again.  
Press ZOOM during playback.  
If “REPEAT ALL” is displayed, the whole disc will be  
played again.  
You can change the zooming ratio by pressing ZOOM  
button more than once.  
If “REPEAT OFF” is displayed, the repeat mode is  
disabled.  
¥
NOTE:  
¥
NOTE:  
You can move in the picture i.e change the zoomed  
location by using the 3/4/6/5arrow keys.  
Repeat Modes are available only when PBC is off.(See  
Page 20)  
Repeating sections between two specific points.(A  
– B repeat)  
To return to normal play:  
After the biggest zoom ratio, press ZOOM again. “Zoom  
Off” is displayed on the screen and the picture is now in  
its normal size.  
Press A-B RPT during playback at the point where repeat  
play is to commence (A).  
Intro - Digest menu  
“A TO B SET A” is displayed on screen.  
Press STOP button if it is in play mode.  
Press A-B RPT again at the point where repeat play is to  
be concluded (B).  
Press MENU button in order to see the menu. This menu  
contains:  
“A TO B SET B” is displayed and the repeat-play of the  
selection between points A and B starts.  
1. Intro  
2. Disc  
3. Track  
4. Exit  
To return to normal play:  
Press A-B RPT again. “ATO B CANCELLED” is displayed  
and the A-B Repeat is disabled.  
¥
NOTE:  
• If you give up entering the point B after entering A simply  
press RETURN, and the operation is cancelled.  
- 22 -  
EN  
 
Intro  
AUDIO CD PLAYBACK  
Intro menu is used for introducing the content of the disc.  
When you select INTRO option, it plays only first 10  
seconds of each track and then passes to the next track.  
Preparations  
Turn on your audio system if the player has been  
connected to an audio system.  
After the last track it stops playing.  
Disc  
Basic Play  
When you select DISC option, unit goes into digest mode  
and 9 pictures each of which shows the first scene of the  
tracks are displayed on the screen.  
1. Press the ON/STANDBY button  
2. Press OPEN/CLOSE ( ) to open the disc tray.  
3. Place a disc onto the tray  
Using the arrow keys, a picture can be selected. When it  
is focused, the picture starts playing within the frame.  
4. Press OPEN/CLOSE ( ) .  
Press ENTER button to start full-screen playback of the  
selected scene.  
Play is commenced.  
After operation  
Press SKIP/STEP :or SKIP 9button in order to display  
next or previous 9 scenes in digest mode.  
When the unit is not in use, remove the disc and press  
ON/STANDBY to turn off the unit.  
Track  
When you select TRACK option, unit goes into digest mode  
and 9 pictures which show different scenes from the first  
track, are displayed on the screen.  
¥
NOTE:  
Using the arrow keys, a picture can be selected. When it  
is focused, the picture starts playing within the frame.  
If the disc is placed in upside down ( and it is a single sided  
disc), the VFD display on the player will indicate “bAd dI”.  
Press ENTER button to start playing of the selected scene.  
For your reference:  
Press SKIP/STEP :or SKIP 9button in order to display  
9 scenes of next or previous track.  
When  
appears while a button is being operated , it  
´
means that the corresponding operation is prohibited by the  
player .  
Exit  
Use this option to quit the menu.  
Bookmark  
Please see page 16 for bookmark operation.  
Stopping Play  
To stop the play permanently, press STOP (<) twice.  
When the STOP (<) button is pressed for the first time, a  
message “PRESS PLAYKEYTO CONTINUE” will appear on  
the screen to remind you if you want to continue the play.  
To stop the play press the STOP (<) button again or you  
can press PLAY/ PAUSE to continue playback.  
Fast Forward / Reverse  
Press 8FWD or REV 7during playback.  
The speed of advance or reverse changes for every  
press of the FWD or REV button.  
Normal play is resumed when PLAY/PAUSE button is  
pressed.  
¥
NOTE:  
No sound will be heard during rapid advance or rapid  
reverse.  
- 23 -  
EN  
 
Skip Forward / Backward  
Repeat Play  
Press SKIP 9or SKIP/STEP:during playback.  
A track is skipped forward or backward each time the  
button is pressed.  
Press PLAY MODE during playback.  
Each time this button is pressed, a different repeat box is  
displayed on the screen.  
When the SKIP 9 button is pressed once midway through  
a track, play returns to the start of that track. When it is  
pressed again in quick succession, a previous track is  
skipped each time the button is pressed.  
If “REPEAT TRACK” is displayed, the current track will be  
played again.  
If “REPEAT ALL” is displayed, the whole disc will be  
played again.  
Pause  
If “REPEAT OFF” is displayed, the repeat mode is disabled.  
Press PLAY/PAUSE once during playback.  
The play suspends.  
¥
NOTE:  
To return to normal play:  
Press PLAY/PAUSE again.  
If the play list is active, the playlist is repeated instead of the  
whole disc in “Repeat All” case.  
Repeating sections between two specific points.  
Direct Selection of Tracks  
(A – B repeat)  
Selecting by Time  
Press A-B RPT during playback at the point where repeat  
play is to commence (A).  
You can play the audio CD starting from any time point you  
want.  
“A TO B SET A” is displayed.  
Press SEARCH on the remote control during playback.  
PressA-B RPT again at the point where repeat play is to be  
concluded (B).  
The time search box is displayed on the screen as TRACK  
TIME _ _ : _ _ : _ _ / xx : xx : xx  
“A TO B SET B” is displayed and the repeat-play of the  
selection between points A and B starts.  
Enter the time using number buttons.  
To return to normal play:  
Player goes to the entered time of the current track.  
Press A-B RPT again. “A TO B CANCELLED” is displayed  
and the A-B Repeat is disabled.  
Press SEARCH on the remote control two times during  
playback.  
The time search box is displayed on the screen as DISC  
TIME _ _ : _ _ : _ _ / xx : xx : xx  
¥
NOTE:  
Enter the time using number buttons.  
If you give up entering the point B after entering A simply  
press RETURN, and the operation is cancelled.  
Player goes to the entered time of the disc.  
¥
NOTE:  
Convenient Functions  
If you give up entering the time simply press RETURN, and  
the operation is cancelled.  
Displaying the time information  
If you wait ten seconds without pressing any key for  
selecting tracks, the operation is cancelled.  
Press TIME during playback.  
Each time this button is pressed, an information box is  
displayed on TV screen to indicate the status of the time  
displayed on the VFD display.  
Accessing tracks using number buttons  
You can play any track you want, just by pressing the  
corresponding number button.  
If “SINGLE ELAPSED” is displayed, the VFD display on the  
unit shows the elapsed time for the track that is being  
played.  
For the track numbers which are greater than “9” use +10  
button. Each press increases the number by 10.Then type  
the second digit of track number.  
If “SINGLE REMAIN” is displayed, the VFD display on the  
unit shows the remaining time for the track which is being  
played.  
If you attempt to enter a number greater than the total  
number of tracks on disc,  
screen.  
symbol is displayed on  
´
- 24 -  
EN  
 
If “TOTAL ELAPSED” is displayed, the VFD display on the  
unit shows the elapsed time for the disc which is being  
played  
CD MENU  
If “TOTAL REMAIN” is displayed, the VFD display on the  
unit shows the remaining time for the disc which is being  
played.  
To see the directory structure (menu) of JPEG/MP3/MPEG  
CDs, you should set CD MENU option to WITH MENU in setup  
page. (See Page 30.)  
Program Function  
If CD MENU option is set to NO MENU, the content is  
automatically played without displaying menu.  
Press STOP button if it’s playing.  
Press PROGRAM button to select program mode.  
Enter track numbers that you want to add to program list.  
Basic Play  
1. Press the ON/STANDBY button  
For the track numbers which are greater than “9” use +10  
button. Each press increases the number by 10.Then type  
the second digit of track number.  
2. Press OPEN/CLOSE to open the disc tray  
3. Place a CD-R / CD-RW disc onto the tray  
4. Press OPEN/CLOSE to close the disc tray  
Press PLAY/PAUSE button to finish the program entry.  
Screen is cleared and it will start playing the program list.  
DISC LOADING message appears on screen. Please wait  
for a moment.  
¥
NOTE:  
CD MENU is displayed. Directories are on the left part and  
files in the selected directory are on the right part.  
• If you attempt to enter a number greater than the total  
number of tracks on disc, it clears the numbers entered  
and waits for you to enter again.  
5. Press UP/DOWN to select file to be played.  
In the stop mode you can navigate in all directories. If an  
MP3 track is playing, only the current directory can be used  
for navigation.  
You can remove the last track of the play list by pressing  
the CLEAR button.  
The program is cancelled when:  
6. Press ENTER,  
files  
,
to switch between directories &  
- The disc tray is opened or closed.  
On the right part:  
- The power is turned off.  
On the right part press RETURN to go to parent directory.  
Intro Menu  
Press to switch to directories.  
Press STOP button if it is playing.  
On the left part :  
Press MENU button in order to see the menu. This menu  
contains:  
Press or ENTER to switch to files. Selected directory  
content is displayed on the right after reading directory.  
First item is highlighted initially.  
1. Intro  
2. Shuffle On/Off  
7. Press ENTER on a file to play  
3. Program  
Alternatively, you can press corresponding number keys  
to select a file in current directory.  
4. Exit  
Intro  
MP3/MPEG File :  
Intro menu is used for introducing the content of the disc.  
Selected MP3/MPEG starts to play.  
When you select INTRO option, it plays only first 10  
seconds of each track and then passes to the next track.  
Elapsed or Remaining Time is displayed according to Time  
Mode.  
After the last track it stops playing.  
JPEG File :  
Shuffle  
Selected JPEG is displayed in full screen.  
When you set SHUFFLE on, it plays the tracks once in a  
random order.  
Slide Show starts automatically.  
Pause  
Program  
Press PLAY/PAUSE once during playback.  
The play suspends. PAUSE message appears on screen.  
To return to normal play:  
When you select PROGRAM option, it activates the program  
mode.  
Exit  
Use this option to quit menu.  
Press PLAY/PAUSE again.  
- 25 -  
EN  
 
¥
NOTE:  
Stopping Play  
During ZOOM function, image transformation is disabled.  
To stop the play permanently, press STOP (<) twice. When  
the STOP (<) button is pressed for the first time, a  
message “PRESS PLAY KEYTO CONTINUE” will appear on  
the screen to remind you if you want to continue the play.  
To stop the play press the STOP (<) button again or you  
can press PLAY/ PAUSE to continue playback.  
Digest Mode:  
Only for JPEG:  
Press PLAY button to start slide show.  
Press TOP MENU button during JPEG slide show. Unit goes  
into digest mode and “9” pictures are displayed on screen.  
Fast Forward / Reverse  
For MP3/MPEG:  
Using the arrow keys, a picture can be selected.  
Press ENTER button to display the selected picture.  
Press REV 7 / FWD8 during playback to decrease/  
increase play speed.  
Press SKIP/STEP:or SKIP9buttons in order to display  
next or previous “9” pictures in digest mode.  
¥
NOTE:  
No sound will be heard during fast forward or reverse.  
PressTOP MENU button to cancel the digest mode to start  
playing.  
Skip Forward / Backward  
Repeat Modes  
For JPEG :  
Press PLAY MODE to change current repeat mode.  
Repeat mode is displayed for a while in slide show mode.  
In CD MENU it is displayed at the bottom.  
Press SKIP 9or SKIP / STEP:during playback.  
Previous or next file in the current directory will be played.  
Displaying The Time Information  
Image transformation  
Press TIME to change displayed time mode.(Only for MP3)  
Only for JPEG :  
Play Modes  
Press PLAY to start slide show.  
Press STOP button.  
There are three modes of transformation:  
Press RIGHT to go to Play Modes menu.  
Press ENTER to change play mode.  
The options available are:  
FOLDER NORMAL  
- Invert  
- Left  
- Right  
These operations are allowed only when a picture is being  
displayed normally, and will be cancelled automatically  
when a new picture is displayed. The arrow keys are used  
to select the different transformation modes.  
When this play mode is selected, the current folder will be  
played once.  
FOLDER REPEAT  
Press 5to invert/normal  
When this play mode is selected, the current folder will be  
repeated continuously.  
Press 3to turn left  
DISC SCAN  
Press 4to turn right  
When this play mode is selected, the first 10 seconds of  
all tracks will be played.  
Zoom  
Only for JPEG:  
DISC NORMAL  
Press PLAY to start slide show.  
When this play mode is selected, the disc will be played  
once.  
For JPEG pictures ZOOM IN / OUTand ZOOM PAN functions  
are available.  
DISC REPEAT  
Press ZOOM to turn on/off this function  
When this play mode is selected, the disc will be repeated  
continuously.  
When this mode is on, any picture will be displayed at the  
last ratio selected by the user.  
SHUFFLE  
A message will indicate the current ratio on screen.  
If zoom mode is on,  
When this play mode is selected, the tracks in the current  
folder will be played once in a random order.  
SINGLE TRACK  
Press REV 7/ FWD8to control the ratio of zoom in/out.  
If this option is chosen, the selected track will be played  
only once.  
- 26 -  
EN  
 
REPEAT TRACK  
SMARTNAVI  
If this option is chosen, the selected track will be repeated  
continuously.  
To see the directory structure (menu) of JPEG/MP3/MPEG/  
MPEG4/DivX CDs, you should set SMARTNAVI option to  
WITH MENU in setup page.  
Press3to go to the file list of the current folder and press  
PLAY/PAUSE to activate the selected playback mode.  
For “SINGLE TRACK” and “REPEATTRACK” modes, press  
5/ 6and ENTER to play the selected track.  
If SMARTNAVI option is set to NO MENU, the content is  
automatically played without displaying menu.  
Program Function  
Press PROGRAM to select program mode in stop mode.  
Program message is displayed.  
Basic Play  
1. Press I / (ON / STANDBY) to turn on the power.  
2. Press OPEN/CLOSE to open the disc tray  
3. Place a CD-R / CD-RW disc onto the tray  
Press NUMBER keys to select files in the current directory.  
Alternatively, you can use UP / DOWN keys and then press  
ENTER to add selected file into the program list.  
Hold the disc without touching either of its surfaces, position  
it with the printed title side facing up, align it with the guides,  
and place it in its proper position.  
Press STOP to finish program.  
PROGRAM MODE will appear at the bottom of CD MENU.  
Press PLAY to start program.  
4. Press OPEN/CLOSE to close the disc tray  
DISC LOADING message appears on screen. Please wait  
for a moment.  
Files in the Program list are played sequentially.  
¥
NOTE:  
SMARTNAVI appeared. Directories are on the left part and  
files in the selected directory are on the right part.  
You can use trick mode keys, skip prev/next files, and so  
on.  
5. Press UP/DOWN to select file to be played.  
You can remove the last track of the playlist by pressing  
the CLEAR button during program setup.  
In the stop mode you can navigate in all directories. If an  
MP3 track is playing, only the current directory can be used  
for navigation.  
The program remains even after the Program Play ends  
If you want to quit program mode:  
Press STOP key if a track is being played.  
Press PROGRAM key.  
6. Press ENTER on a file to play  
If a file is focused on the left part, the preview of the item  
is displayed. If a folder is focused on the left part, the total  
number of files in that directory is displayed.  
Press STOP key again.  
The program is cancelled when:  
- The disc tray is opened or closed  
- The player is turned off  
MP3/MPEG/MPEG4/DivX File :  
Selected MP3/MPEG/MPEG4/DivX starts to play.  
Elapsed or Remaining Time is displayed according to Time  
Mode.  
- In each directory change  
JPEG File :  
Selected JPEG is displayed in full screen.  
Slide Show starts automatically.  
Pause  
Press PLAY/PAUSE once during playback.  
The play suspends. PAUSE message appears on screen.  
To return to normal play:  
Press PLAY/PAUSE again.  
Stopping Play  
Press stop (<) twice.  
The play is stopped. STOP message appeared on screen  
for a while.  
- 27 -  
EN  
 
Fast Forward / Reverse  
Repeat Modes  
For MP3/MPEG/MPEG4/DivX :  
Press PLAY MODE to change current repeat mode.  
Repeat mode is displayed for a while in slide show mode.  
In SMARTNAVI it is displayed at the bottom.  
Press FWD 8 or REV 7 during playback to decrease/  
increase play speed.  
¥
NOTE:  
No sound will be heard during fast forward or reverse.  
Displaying The Time Information  
Press TIME to change displayed time mode.  
Skip Forward / Backward  
Press SKIP / STEP :or SKIP 9during playback.  
Program Function  
Next or previous file in the current directory will be played.  
Press PROGRAM to select program mode in stop mode.  
PROGRAM Message appears.  
Image transformation  
Press NUMBER keys to select files in the current directory.  
Only for JPEG :  
Alternatively, you can use 5 / 6keys and then press  
ENTER to add selected file into the program list.  
Press PLAY / PAUSE to start slide show.  
PROGRAM Message appeared with the current file index  
and the total files in the list.  
There are three modes of transformation:  
- Invert  
- Mirror  
- Left  
Press STOP to finish program.  
PROGRAM Message is appeared at the bottom of  
SMARTNAVI.  
- Right  
Press PLAY/PAUSE to start program.  
PLAY Message appears.  
These operations are allowed only when a picture is being  
displayed normally, and will be cancelled automatically  
when a new picture is displayed. The arrow keys are used  
to select the different transformation modes.  
Files in the program list are played sequentially.  
Press 5to invert/normal  
Press 6to mirror  
¥
NOTE:  
You can use trick mode keys, skip prev/next files, and so  
on.  
Press 3to turn left  
Press 4to turn right  
You can remove the last track of the playlist by pressing  
the CLEAR button.  
The program remains even after the Program Play ends  
Zoom  
Only for JPEG:  
If you want to quit program mode:  
Press STOP key if a track is being played.  
Press PROGRAM key twice.  
Press PLAY / PAUSE to start slide show.  
It is provided both ZOOM in/out and Zoom pan functions for  
JPEG pictures.  
Press ZOOM to turn on/off this function  
The program is cancelled when:  
- The disk tray is opened or closed  
- The player is turned off  
When this mode is on, any picture will be displayed at the  
last ratio selected by the user.  
A message will indicate the current ratio on screen.  
If zoom mode is on,  
- In each directory change  
Press REV 7/ FWD 8to control the ratio of zoom in/out.  
¥
NOTE:  
During ZOOM function, image transformation is disabled.  
- 28 -  
EN  
 
MENU ITEMS  
USING SETUP MENU  
Press SETUP/DISP key on the remote control when the  
player is not in playback mode.  
VIDEO SETUP  
VIDEO SETUP page will not be available if the player is in  
RESUME (Pre-Stop) mode.  
The setup menu-main page appears. This is the menu,  
where you can change the device’s settings.  
TV DISPLAY:  
The aspect ratio of the picture provided by the DVD player  
can be varied in line with the features available on the TV  
in use.  
USING MAIN PAGE  
Select items using 6/5up/down arrow buttons.  
When selected, the item will be highlighted.  
The options available are:  
NORMAL / PS (4:3 Pan & Scan):  
Press ENTER to choose the highlighted item.  
The submenu for the selected item appears on the screen.  
Allows you to see the movie fill the entire screen of your  
TV, but not the right and left edges. This type of picture can  
only be viewed, if it is contained on the disc.  
SETUP menu will only be available when the player is not  
playing a disc.  
In RESUME (Pre-Stop) mode, some pages and some items  
can not be accessed. On the MAIN page, you can not  
access VIDEO SETUP and PARENTAL SETUP pages in  
RESUME mode.  
NORMAL / LB (4:3 Letterbox):  
Allows you to see movies in their original aspect ratio. You  
will see the entire frame of the movie, but it will occupy a  
smaller portion of the screen.  
¥
NOTE:  
To close the setup menu, select EXIT SETUP and press  
ENTER, or press SETUP/DISP.  
USING SUB MENUS  
Use 3/4left/right arrow buttons to switch between left  
and right menus.  
WIDE (Wide screen 16:9):  
Once you enter any submenu,  
Choose this setting if your DVD player is connected to a  
wide-screen TV.  
Use 6/5up/down arrow buttons to move the highlighted  
position up and down.  
Press ENTER to choose the highlighted option on the right  
menu.  
To close the setup menu, press SETUP/DISP.  
¥ NOTE:  
¥
NOTE:  
Depending on the format of the DVD disc. (eg. 2.35:1) the  
picture may still have black lines above and below this  
picture.  
• In any submenu, to return to main page, select MAIN PAGE  
and press ENTER button.  
To close the setup menu, select EXIT SETUP and press  
TV TYPE:  
ENTER, or press SETUP/DISP.  
The video standard of the DVD player output can be  
selected from ‘MULTI’, ‘NTSC’ or ‘PAL’.  
If ‘MULTI’ is selected, the output standard will be either  
NTSC or PAL depending on the DVD being played.  
If ‘PAL’ is selected, the video output will be converted to  
PAL standard irrespective of disc standard.  
If NTSC is selected, the video output will be converted to  
NTSC standard irrespective of disc standard.  
- 29 -  
EN  
 
AUDIO SETUP  
PARENTAL SETUP  
It is not possible to connect speakers directly to this DVD  
player; an AV amplifier must be used.  
PARENTAL SETUP page will not be available if the player  
is in RESUME (Pre-Stop) mode.  
Playing some DVDs can be limited depending on the age of  
users. The “Parental Control” function allows playback  
limitation level to be set by the parent.  
DOWNMIX MODE:  
This mode allows the DVD player analog audio outputs to  
be matched to the features available on the TV in use.  
Analog audio outputs can be selected as  
PARENTAL SETUP (Parental Level):  
STEREO: Two channels stereo.  
Parental Level can be adjusted to one of the eight levels or  
“NO PARENTAL”. “NO PARENTAL” or level “8 ADULT”  
adjustments let you watch all of the DVD titles ignoring the  
DVD disc’s parental level. You can watch the DVD discs,  
which have the same or lower parental level than the  
player’s selected level only.  
Use this option if you have a stereo TV or a stereo HI-FI  
system.  
SURROUND:  
Do not use this option if your DVD player is not connected  
to a multichannel TV or multichannel AV receiver. It is  
particularly important not to enable speakers, which are  
not present. Otherwise serious sound quality problems  
will be experienced.  
PASSWORD:  
Password to change the parental level can be set by using  
this option.  
You have to set a 4- digit password when you select a  
parental level for the first time.You have to enter your  
password every time you want to change the parental  
level. If you forget your password please contact technical  
service.  
DYNAMIC (Dynamic Range Compression):  
Boosts frequency response. This item can be selected  
between “OFF” and “FULL”.  
LPCM OUTPUT:  
Change Password:  
This item can be selected as “LPCM 96K” or “LPCM 48K”.  
DTS OUTPUT:  
Using this item you can change the current password.  
To change the password you will be prompted to enter  
your old password. After you have entered your old  
password, you can now enter the new 4-digit password.  
DTS Output can be selected as “ANALOG” or “DIGITAL”.  
ANALOG : Use this setting if your player is connected to  
your TV or to your audio system through analog audio  
output or your digitally connected audio system doesn’t  
support DTS decoding feature.  
You can use CLEAR key to delete the incorrect entry.  
Press OPEN/CLOSE to activate parental setup setting  
DIGITAL : Use this setting if your player is connected to  
DTS decoding audio system via digital audio output.  
PREFERENCES  
ANGLE MARK, CD MENU and DEFAULTS items will not be  
available if the player is in RESUME (Pre-Stop) mode  
LANGUAGE SETUP  
Audio, disc menu and subtitle items will not be available if  
the player is in RESUME (Pre-Stop) mode.  
ANGLE MARK:  
OSD LANG:  
This option allows you to turn on /off the angle mark on the  
screen, which is displayed to indicate that a multi angle  
scene has started. It also shows which angle you are  
currently watching.  
You can select the default OSD language of the player  
menus  
AUDIO:  
STANDBYTIME:  
You can select the default audio language if supported by  
that DVD disc.  
Standby activation time can be adjusted or standby can be  
disabled using this option. If one of the time options is  
selected, standby is activated, whenever no key is  
pressed for the selected time duration in stop mode.  
DISC MENU:  
You can select the DVD’s disc menu language among  
these languages. Disc menu appears in the selected  
language, if supported by that DVD disc.  
CD MENU:  
This option allows you to enable or disable the CD MENU,  
which is used for playing MP3, MPEG or JPEG CDs.  
SUBTITLE:  
You can select the default subtitle language if supported  
by that DVD disc.  
TRANSPARENCY:  
Using this option one of the transparency levels can be  
selected for on screen display.  
- 30 -  
EN  
 
DEFAULTS:  
If you choose RESET and press ENTER button, the  
factory-presets are loaded. Parental level and parental  
password do not change.  
DIVX(R) Registration :  
There is a registration code in this page. This code is  
utilized to register this player with the DivX(R) Video On  
Demand service. This will allow you to rent and purchase  
video using the DivX(R) Video On Demand format.  
DivX DRM User Steps:  
1. The User will open the DivX Registration page by  
entering the SETUP menu of the Player.  
2. You will get the DivX VOD registration code via the  
internet. The address for the DivX VOD website is:  
3. After entering the address above on the Internet, go to  
the section where registration is to be made for DivX DRM  
membership.  
4. Use the DivX DRM Registration code you receive from  
the Player to register and set a username and a password  
for yourself.  
5. Once the registration process in over, you will  
download the DivX DRM activation file from the Internet  
and write it onto a disc.  
6. After inserting this disc into the player and playing the  
activation file,you will have a new player DivX DRM  
Registration code activated for the player DivX DRM.  
7. When you want to download and watch movies, you  
to download movies with your pre-designated username  
and password by paying a certain charge. Upon writing  
this film on the disc and inserting it into the Player, you can  
watch these the number of times that you are entitled to  
watch.  
- 31 -  
EN  
 
TROUBLESHOOTING  
- 32 -  
EN  
 
SPECIFICATIONS  
DVD/VCD/CD/CD-R/CD-RW/MP3/MPEG/JPEG/DivX player,  
- 33 -  
EN  
 
DEFINITION OF TERMS  
Angle  
Recorded onto some DVD discs are scenes, which have been simultaneously shot from a number different angles (the same  
scene is shot from the front, from the left side, from the right side, etc.). With such discs, the ANGLE button can be used to  
view the scene from different angles.  
Chapter Number  
These numbers are recorded on DVD discs.Atitle is subdivided into many sections, each of which are numbered, and specific  
parts of video presentations can be searched quickly using these numbers.  
DVD  
This refers to a high-density optical disc on which high-quality pictures and sound have been recorded by means of digital  
signals. Incorporating a video compression technology (MPEG II) and high-density recording technology. DVD enables  
esthetically pleasing full-motion video to be recorded over long periods of time (for instance, a whole movie can be recorded).  
DVD has a structure consisting of two 0.6 mm thin discs, which are adhered to each other. Since the thinner the disc, the higher  
the density at which the information can be recorded, a DVD disc has a greater capacity than a single 1,2 mm thick disc.  
Playback Control  
This is recorded on a Video CD (Version 2.0). The scenes or information to be viewed (or listened to) can be selected  
interactively with the TV monitor by looking at the menu shown on the TV monitor.  
Subtitles  
These are printed lines appearing at the bottom of the screen, which translate or transcribe the dialogue. They are recorded  
on the DVD discs.  
Time Number  
This indicates the playtime, which has elapsed from the start of a disc or a title. It can be used to find a specific scene quickly.  
(Not all discs permit the time search feature to be used. Availability is determined by the disc’s manufacturer.)  
Title Number  
These numbers are recorded on DVD discs. When a disc contains two or more movies, these movies are numbered as title  
1, title 2, etc.  
Track Number  
These numbers are assigned to the tracks which are recorded onAudio CDs. They enable specific tracks to be located quickly.  
Video CD  
This contains recordings of pictures and sound whose quality is on a par with that of video tape. This player also supports  
Video CDs with playback control (Version 2.0).  
Dolby Digital  
Many movie theaters are equipped with 5.1 channel surround systems. This same type of technology is available to you in  
your home. To enjoy full 5.1 channel surround, your DVD player must be connected to an external Dolby Digital decoder  
via the digital outputs .  
Dolby Pro Logic  
This is Dolby Laboratories’ technology to decode Dolby Surround encoded programs actively. Dolby Surround programs have  
four channels of audio (Left, Center, Right and Surround) encoded into a standard 2-channel stereo signal. The rear channel  
is monaural.  
PCM  
PCM stands for Pulse Code Modulation and is digital audio.  
MPEG  
Short for Moving Picture Experts Group. This is an international standard for compression of moving images. On some DVDs  
digital audio has been compressed and recorded in this format.  
DivX  
DivX is a digital video compression technology based on MPEG-4 and developed by DivX Networks Inc.  
- 34 -  
EN  
 
¥
NOTE:  
• This DVD player may not support some MP3 recordings due to differences in recording formats or disc type.  
• Please read the owner’s manual about MP3 playback  
• CD-R/CD-RW discs recorded by CD-DA method can be played. Some CD-R/CD-RW discs my be incompatible due to laser  
pick-up and disc design.  
• Some VCD discs may be incompatible .  
• DVD-R discs recorded by DVD-Video method can be played . Some DVD-R discs may be incompatible due to laser pick-  
up and disc design.  
• Some discs may be incompatible with JPEG Viewer function due to different recording format or condition of the discs.  
- 35 -  
EN  
 

Thule Automobile Accessories Kit 138 User Manual
Tiger Games 59939 2 User Manual
Toastmaster Can Opener 2238 User Manual
Toshiba CRT Television 27A35C User Manual
Toshiba TV DVD Combo MD20P1 User Manual
United States Stove Gas Heater B9945L User Manual
Vantec Personal Computer CCB A6C User Manual
Vizio Flat Panel Television D650i C3 User Manual
VTech Telephone t2326 User Manual
Weber Gas Grill 56216 User Manual